Tag Archives: issue

REMEMBERING THE GREATEST BAJA BIKE EVER BUILT: THE FEED

In the February, 2000 print problem of Dirt bike, we take a look at what would go down in historical past as the best Baja bike ever constructed: the liquid-cooled XR650R. Today, we all know that such a motorbike may by no means survive within the market. Baja is simply too specialised for mainstream USA. On prime of that, the bike’s timing was horrible. It was sandwiched between the Yamaha YZ426F and the Honda CRF450R. Those bikes had been recreation changers in each method. Nonetheless, we had been blown away by the XR650R. Here’s what we needed to say when in our first take a look at.

Larry Roeseler was one of many DB take a look at riders on the unique XR650R.

Here’s how this story ends: The Honda XR650R is a really nice XR600R. That’s what it was meant to be all alongside. But by no means earlier than have so many individuals needed a motorbike to be one thing else. There are the moto-crazies who need it to be a Yamaha YZ400. There are the cross-country guys who need it to be a Japanese Husaberg. There are even the pinnacle circumstances who need it to be a Scott Summers reproduction (in different phrases, a worn-out XR600 with humorous bars).
When the bike was lastly introduced final September, the response was unusual. It was completely predictable that the bike would match proper into the XR600’s market, however some individuals had been nonetheless shocked. It wasn’t what they needed, in order that they needed it to be a failure.

Forget all that “Honda’s answer to the YZ426” stuff. The XR650R was designed from the begin to be the reply to the XR600R. Never thoughts that the 600 remains to be round in Honda’s line-up; that was only a measure to fill the time hole earlier than the 650’s late arrival. You most likely keep in mind the hoopla final yr. Honda introduced that the 600 was discontinued, then modified its thoughts. The new 650 wasn’t but prepared. From that clue, individuals ought to have discovered that the brand new bike was going to be a big western path bike, not a motocrosser and never a race bike.
Heaven is aware of there was loads of room for enchancment on the 600. We’re probably not positive how lengthy the 600 had gone unchanged, none of us have reminiscences that return that far. We assume it was most likely dropped into the Garden of Eden in its current type. By trendy requirements, it had lengthy been thought of gradual, heavy and unreliable if hopped up. Long in the past, Honda’s Baja crew had found all its faults and amassed a listing of advisable modifications if the bike had been ever to be up to date. But the manufacturing facility didn’t see any purpose for that. Honda offered each XR600 it constructed (and it constructed so much). The bike had a following. Then, in 1996, the XR400R was launched and it instantly surpassed the 600 in gross sales. That satisfied Honda to go forward with a brand new model of the 600.
Here it’s. Nothing is identical besides the aim. The liquid-cooled engine nonetheless makes use of a single overhead cam, but it surely not has the radial four-valve design. There are two more-or-less standard rocker arms working the 4 valves. The metal cylinder liner is gone in favor of Nikasil-coated aluminum. If you had been anticipating some new know-how from the engine, overlook it. Remember, it is a substitute for the XR600, which implies conservative, dependable designs. Just placing radiators on the bike was a giant inner controversy at Honda. So there are not any throttle place sensors, no laptop chip devices and no large surprises. Double over-head cams had been even rejected as being too gimmicky for the conservative XR market. One function that we haven’t seen earlier than on a Honda is a Husaberg-like reed valve within the crankcase, which permits engine strain to push oil into the gearbox, though the engine nonetheless makes use of a standard pump to maneuver oil as much as the highest finish. Honda additionally needed to cope with the American feds. The firm did it within the regular methods, with restrictions within the consumption manifold, airbox and exhaust. Honda affords what it calls “full power” components to exchange the usual consumption manifold and exhaust baffle, and you’ll take away the airbox restrictor in seconds. We did all that earlier than testing the bike. That’s just about customary process with Japanese off-road bikes nowadays.

We acquired in hassle with this undertaking bike. We tried to shave weight and failed. Honda take a look at riders had been offended by the inverted fork, which they’d argued towards in testing.

The body, alternatively, is something however customary; we’ve by no means seen something prefer it earlier than. It’s manufactured from huge aluminum box-section tubing with a single spine that carries the oil provide for the dry-sump motor. The CR-style twin-spar aluminum body was poo-pooed as a result of it limits gasoline capability an excessive amount of. As it’s, the brand new XR carries the identical quantity of gasoline because the 600, however between the massive spine and the radiators there may be little area left over. We don’t have any thought how the aftermarket guys like IMS and Clarke are going to construct these huge Baja tanks, however we’re positive they’ll. The aluminum body is painted simply to maintain corrosion underneath management in the long term. Remember, that is imagined to be a put- it-away-wet sort of motorcycle.
Honda execs determined to make use of KYB suspension for the XR650. How do they make these choices? Dart board, so far as we all know. The 600’s Showa fork was ridiculously dated, although. There was a lot underhang under the axle that it could virtually drag on stage floor. The new KYB fork relies on the 1989 Kawasaki standard fork that everybody preferred a lot. Underhang has been lowered since then, and the world across the axle has been strengthened so the bike goes considerably straight in ruts. The rear shock is CR-like, except for the lacking high-speed compression adjuster. The XR nonetheless has a loopy quantity of leverage on the rear shock, which implies it has to have an excellent stiff spring.

This precise XR650R was raced within the Baja 2000 by Johnny Campbell.

HOW XR IS IT?
Can you think about what would occur if we waited all this time for a brand new XR and it sucked? It simply wouldn’t occur. This is Honda we’re speaking about. The bike has an superior motor. First of all, it begins simpler than the outdated 600. Yes, we might nonetheless relatively have an electrical starter, however that is the subsequent neatest thing. There is not any beginning drill to follow, no top-dead-center to search out. You simply kick and let the automated decompressor do the work. How concerning the energy? Frankly it couldn’t be higher. It’s quick however not nasty. Big, highly effective four-strokes are often brutes; they run badly off the underside, they stall, they vibrate, they backfire, they’ve horrible engine braking, they pull your arms out of their sockets and basically haven’t any manners. An uncorked 650 Honda has all the great traits of a giant thumper and not one of the dangerous ones. The powerband is so large that you could possibly experience all day in prime gear. It pulls and pulls and pulls. And it has simply sufficient of successful to be enjoyable. The entrance finish comes up for those who yank the throttle cable in virtually any gear, however for those who roll it on gently, the bike is tremendous straightforward to manage. In outright energy, the bike is method stronger than an XR600. We know, that’s not saying a lot. A barely hopped-up XR400 is stronger than a 600, too. But the 650’s energy output might be in comparison with a European four-stroke. A Husaberg 501 or a VOR 503 in enduro trim are in the identical league because the Honda, though we have to say {that a} Husaberg 600 would wax all of them. But the XR has straightforward potential for extra roost. Even with the baffle and consumption restrictor eliminated, it’s tremendous quiet, so you could possibly at all times commerce decibels for horsepower for those who want extra juice. Only factor is, we are able to’t think about why. In real-world acceleration on pavement, the bike will outpull a 250cc motocross bike. On prime, it should contact 99 mph. Johnny Campbell’s Baja-winning 650 had a special exhaust, greater compression and a 45-tooth rear sprocket. That bike was clocked at 105. Actually, Johnny Campbell experiences that the gearing alone would supply that prime pace. The exhaust and the compression simply assist acceleration.

Back in the actual world, the record of issues {that a} inventory XR650 doesn’t do is fairly spectacular. It doesn’t cough and die while you seize a handful of fuel. It doesn’t vibrate. It doesn’t require two palms to twist the throttle. It doesn’t have unmanageable quantities of engine braking. It does have manners.

Honda’s Baja crew consisted of Johnny Campbell, Tim Staab and Steve Hengeveld.

OKAY, LET’S TALK POUNDS
We anticipated the bike to have a terrific motor. We didn’t anticipate it to weigh a lot. The XR650R suggestions the Dirt Bike tremendous scale at 287 kilos with out gasoline. That’s so much. Just think about if it had a metal body, or double overhead cams, or worse but, an electrical starter! That form of weight would have been okay a couple of years in the past, however not now. When you have a look at the motor, it’s straightforward to see the place the load is. It’s enormous! In all of the years of technological development because the XR600 was designed it’s wonderful that Honda hasn’t discovered any approach to shave off bulk. The motor is narrower, not less than, than a 600. But while you experience the XR you may’t escape the load. You really feel each pound.

That dictates the bike’s mission. It is a motorbike for going quick in large open areas, similar to the outdated XR. And it does that extraordinarily properly. The 650 is tremendous secure. We don’t know why, however the brand new XR, similar to the outdated XR, by no means has head shake. It ought to. It has mushy, soft suspension and sharp cornering manners. That’s the recipe for a wild experience with loopy wet-dog-like head shake. But the bike is so regular at pace that you simply actually don’t notice how briskly you’re going. At the opposite excessive, the bike is, as soon as once more, similar to an XR600. The approach for getting round turns is as follows: Point the entrance wheel the place you wish to go, then go there gently. You don’t have to slip the again finish across the entrance wheel, you simply steer it with out the exercise. The weight solely turns into an element for those who get in a rush. Then the entrance finish pushes, the brakes lock up and you are feeling just like the bike simply grew in each dimension. Scott Summers manages to defy the legal guidelines of physics by profitable races in tight terrain on his XR, however that doesn’t imply a lot. Scott is one in every of a form, and now we have little doubt that he’ll proceed to win races when he trades in his 600 for a 650 subsequent season.
Kayaba did a superb job with the suspension. It’s by no means an element, irrespective of the place you experience. At excessive pace, there’s no mushiness, but the XR is superior in first-gear rocky sections. It’s exhausting to do each. The rear finish, specifically is tremendous versatile. You can deal with killer San Felipe whoops after which choose your method via bomb craters with out altering a factor. The entrance fork handles the rocks simply in addition to the rear, however you may backside it exhausting for those who hit one thing at pace. That’s effective with us. We wouldn’t wish to commerce away the tremendous soft experience simply to keep away from listening to one or two clunks on any given experience.

Scott Summers was not a part of the XR650 growth teat. He tried to race the bike, but it surely wasn’t a superb match.

WHAT’S SO SUPER?
Honda isn’t infallible within the element division. Just ask any first-year XR400 proprietor. In this case, although, Honda paid significantly better consideration to the little stuff. The kickstarter, as an illustration, doesn’t flop out, the shifter isn’t tremendous flexy and the carburetion is flawless. We are barely dissatisfied by the spindly rear brake lever, the slim footpegs and the tacky plastic skid plate, however we’ll recover from it. So was it well worth the wait? Good grief, no; not for those who’ve been ready for over ten years for a greater XR600. Nothing may very well be value that form of wait. There is nothing on this bike apart from the aluminum body that wasn’t widespread know-how again in 1990. But you might want to keep in mind that a part of the unique XR’s enchantment was that it had old-world, confirmed designs. In 1990, that meant an air-cooled, barely chubby bike with a terrific character. In 2000, it means a liquid-cooled, barely chubby bike with a terrific character. If you like the XR system, you received’t be dissatisfied by the most recent one. We all fall into that class. As we mentioned up entrance, the Honda XR650R is a really nice XR600R. If you need one thing else, you’ll should look someplace else.

Rare picture of Scott Summers on the XR650R.

XR vs XR
How did the XR600R final so lengthy? Maybe it was as a result of it did its job so properly. Frankly, even in any case these years, there was no bike that was so comfort- ready for prime pace and lengthy distances. There had been actually higher race bikes, however the 600 was the last word western playbike. Can the 650 do higher?
• POWER: Yes. The 650 has extra energy in every single place and it’s simply as straightforward to make use of. Usually horsepower comes with a penalty someplace. Not on this case. The new 650 is even simpler to begin.
• SUSPENSION: Yes, the 650 wins once more. The new XR’s fork is an enormous step ahead. It flex- es much less and gives higher motion at excessive pace and low pace. The rear suspension on the outdated 600 is surprisingly good by trendy requirements, but it surely nonetheless provides up a bit of at race pace to the 650.
• WEIGHT: No. The outdated 600 is not any light-weight, but it surely feels and is lighter than the brand new 650, if solely by a tiny margin.
• HANDLING: Yes. Both bikes will beat you up at race pace, however the brand new XR’s suspension benefit makes it a bit of simpler to handle.
• COMFORT: It relies upon. The 600 has old-world ergonomics. With loads of rearward sweep within the bars and a giant, soft seat, the 600 is a sit-down bike. If that’s what you want, that’s what you want. It’s simpler to face up on the 650, and the smoother tank/seat junction makes transferring round simpler.
• RELIABILITY: Only time will inform. The 600 had a status for being unbreakable, however solely when left inventory. If it had been hopped as much as the extent of a inventory 650, be careful! Chances are that the identical shall be true of the brand new bike: go away it alone and it’ll by no means break. And with this a lot energy, leaving it alone is not any downside.

So there you may have it. The 650 is a worthy successor to the preferred dust bike of our time. Will the 600 proceed to be accessible? For now, sure. But as quickly because the 650 eats into the 600’s gross sales figures, which is inevitable, Honda will drop the outdated XR like a sizzling rock. The enterprise of bike gross sales leaves little room for sentimentality.

Could retro French headlights remedy a evident subject?

I’m happy to see the government is to look into the issue of headlight brightness and glare – let’s hope they squint a bit – following a current RAC survey that discovered a lot of drivers thought dazzling was an issue.

There could, although, not be a fast legislative repair. The Department for Transport has already been speaking to a United Nations professional group on car lighting – who knew? – however proposals to introduce automated beam alignment, which might decrease beams as vehicles go over hills and the like, gained’t come into play till 2027.

And even then? Well, I’ve pushed quite a lot of vehicles with probably the most superior ‘intelligent’ lighting on sale, which robotically aligns the beam or limits the areas lit by excessive beam, and nonetheless discovered oncoming drivers flashed me as a result of they have been being dazzled. As in lots of circumstances of legislated know-how, a few of it isn’t as much as the job.

No, what we may do with is an answer, and sharpish. Some vehicles retain a change to decrease the beams in case you’re carrying a load within the again, however it’s an more and more small variety of them. In the overwhelming majority of latest vehicles, there’s not lots you are able to do about your personal glare.

It’s not like you possibly can take aside a £1500 unit with 1200 LEDs, every with the ability of the solar, to exchange the bulbs both.

Fortunately, the French used to have the right resolution, which you’ll bear in mind in the event you took a vacation there earlier than the Nineties since you’ll have needed to decide up a bit pot of yellow paint to daub in your headlights to provide them an acceptable glow.

An article I discovered means that transferring from white gentle onto a extra yellowy a part of the spectrum has an extended wavelength, which is sort of good for seeing it, and it displays much less off of water.

But additionally, conveniently, that daubing your headlights with a bit yellow pot of paint would, naturally, scale back the brightness as certain as letting them grow to be ever extra filthy. Limited analysis means that as long as each side of the automobile have an identical hue, MOT testers would give it a nod.

Now, I haven’t absolutely investigated the scientific rigour of this characteristic and given it may imply new Alpine A110s operating round in French blue and with yellow headlights, and that after each third automobile wash we’ll be refreshing the yellow tint to make it really feel like setting off on a Eighties driving vacation, I’m not about to. But past the jokes, may there not be one thing in it?

Driver Somehow Survives Launching Car Off 200-Foot Embankment

Distracted driving stays a serious subject within the US. Taking your eyes off the street for only a second can result in disaster, which occurred to at least one Oregon driver who launched their automobile off a 200-foot embankment, in keeping with the Oregon State Police.

Dashcam footage printed beneath captured the second when a 2023 Honda CR-V left the street, driving straight via a curve and into a brief runoff. The SUV didn’t cease, launching into the air and disappearing from the body with its nostril pointing down into the void.

The driver survived the crash, however Oregon State Police instructed Motor1 in an e-mail that the motive force sustained reasonable, non-life-threatening accidents. OSP posted on Facebook that the motive force extricated themselves from the Honda. Rescuers deployed a rope system to hold the motive force up the hill, the place an ambulance was ready to take the motive force to a neighborhood hospital for remedy.

The crash occurred on Monday, February 26, at 10:42 a.m. in Clackamas County on Highway 224 southeast of Portland. Motor1 requested the police report, nevertheless it hasn’t been accomplished but. The driver didn’t obtain a quotation for the accident. 

This One-Off Toyota Crown Convertible Is Oddly Compelling

As buttoned-up as Toyota could appear, the automaker has no concern being slightly bizarre from time to time. Its newest oddity depends on a design development that many had hoped died with the Nissan Murano CrossCabriolet however continues to exist within the type of the Volkswagen T-Roc Cabrio. Toyota determined to run with it, turning its Crown crossover right into a high-riding, four-door convertible.

The black-and-bronze Crown isn’t the primary crossover to lose its roof, however it’s uncommon to see such a physique fashion with 4 doorways. Toyota designers had a number of hurdles to beat in constructing the one-off convertible, counting on a 3D printer to supply many new parts, which movement seamlessly into the remainder of the bodywork.

The new rear deck elegantly connects the fashionable exterior with the white cabin. The four-door structure retains the drop-top Crown from trying too stubby, preserving the fashionable proportions not like different convertible crossovers. 

The construct required the engineers to weld new elements by hand, and the extra reinforcements made it difficult to assemble. The completed product appears prefer it rolled off the meeting line alongside the remainder of the Crown lineup.

Toyota has constructed convertible variations of the Crown up to now, providing the vehicles for parades and different occasions, and the corporate is already churning out variants of the newest mannequin. It’s already obtainable as a sedan, a wagon, and a standard crossover, and the automaker is curious about bolstering the lineup with extra physique kinds depending on reception.

So, there’s an opportunity the Crown convertible would possibly leap from being a one-off idea automotive to coming into mass manufacturing. However, the Murano solely lasted a couple of mannequin years, and the Land Range Rover Evoque Convertible was only a blip, so the playing cards aren’t stacked in Toyota’s favor. But the idea is an efficient first shot we wouldn’t thoughts seeing on US roads.

KTM OIL LIGHT FIX: MR-KNOW-IT-ALL

Dear Mr. Know-It-All,
My 2024 KTM 300XC-W has been a superb machine up to now. The solely situation I’m pissed off with is that I not too long ago seen that the bulb and grommet for the oil-indicator mild retains vibrating unfastened and falling behind the headlight. Kind of harmful since, if it falls out, you’ll not see the sunshine activate in case your oil is low. Is there a repair for this?
by way of [email protected]

Despite the unimaginable know-how stamped into the DNA of at the moment’s machines, there are trivial points which can be merely head-scratchers. This has been an itch for years, and as ridiculously easy because the remedy is, it has contaminated even my shut entourage of riders. One of our guys did not peruse the cockpit of this 300 TPI (I at all times reset my odo and verify the oil mild), left for a giant experience, ran it out of injector oil and seized his steed.

In my humble opinion, the 2 greatest strategies to counter that is to get within the behavior of simply topping off your oil earlier than you experience. The different is to place a dollop of silicone on the grommet and push it up into the sunshine housing so it is going to then keep in place. It’s frequent sense, which sadly is just a slogan for many of my comrades.

crude illumination

If you don’t thoughts displaying your ignorance for the world to see, who’re we to disclaim the chance? Send proof of your failures.
e mail: [email protected]
mail: Dirt Bike Mr. Know-It-All 25233 Anza Dr. Valencia, CA 91355

5 Of The Coolest Products In Ryobi’s ‘Link’ Modular Storage System

One concern with the Link Wall-Mounted Cabinet is the area it takes up. Depending on what number of slots within the modular system you’ve got, you might want one thing extra space-friendly, just like the Link Tool Organizer Shelf. What we like about this shelf is that its 50-pound capability is unfold out throughout totally different storage choices.

The flat shelf measures 21 inches large by 11 inches deep, so you will have loads of room for odds and ends like additional batteries and instruments that won’t match elsewhere on the modular storage. In addition to the shelf area, you get a skinny properly for issues like drill bit units, in addition to 4 under-mounted energy software slots and a row of cutouts for hand software storage. 

As Pro Tool Reviews notes, the highest shelf is massive sufficient for Ryobi’s small fan, a spare battery, and a Ryobi mild, and there are many storage choices throughout for handheld instruments, screws, nails, gloves, and different equipment. Users are particularly constructive in regards to the shelf, with many touting the way it maximizes the usage of the modular area.

Ryobi’s Link Modular Storage System is all about customization and flexibility, and the organizer shelf makes good use of its area by taking on little room in your wall whereas providing loads of storage.

Here’s What It Means If Your Tires Make A Thudding Noise

A thudding noise whereas driving is, most of the time, a telltale signal of a problem straight associated to the tires. One widespread purpose is tire imbalance, the place the load distribution across the tire is uneven, resulting in erratic rotation and a noticeable thud with every flip of the wheel. Another potential problem could possibly be uneven tire put on, which regularly outcomes from improper alignment or inconsistent tire rotation schedules, which not solely produces a thudding sound but in addition impacts the automobile’s dealing with and gas effectivity.

There can be an opportunity that underinflated or overinflated tires or incorrect tire stress might very nicely be the primary contributors to this drawback, which is why correct inflation and regularly checking the tire pressure not solely ensures a easy and secure experience but in addition extends the lifespan of your tires.

The clamorous catalyst could possibly be from bulges, blisters, or deep cuts, generally identified defects identified for compromising the tire’s construction, inflicting irregular actions and sound-emitting vibrations. Debris or international objects entrenched within the tires, similar to nails or stones, might very nicely be inflicting the calamity, as they have a tendency to create an uneven floor on the tire tread. Another concern which will find yourself being the supply of the commotion could possibly be inside injury, similar to damaged belts or points with the wheel’s inside construction.

Whatever the trigger may be, making each effort to make sure these tire-related dilemmas are promptly rectified is essential not just for eliminating the noise but in addition for making certain the automobile’s security and optimum efficiency. It’s additionally really helpful that customers substitute their tires each six years. But whereas they’re usually the wrongdoer, the wheels, surprisingly, aren’t the one suspects on this case.

Why It’s Not a Good Idea to Use WD-40 on Your Brakes and Rotors

If you hear a squeaking noise from your brakes, it’s important to understand the underlying issue before attempting any fixes. In some cases, the noise may be due to condensation on the brakes, which can easily be resolved by parking your vehicle in a climate-controlled area overnight. Additionally, gently applying the brakes early in your drive can help reduce or eliminate the noise. While applying WD-40 might temporarily displace the water and quiet the brakes, it is not a long-term solution unless you plan to do it every day.

However, squeaky brakes can also be an indication that your brake pads are worn out and need to be replaced. This noise serves as an important safety warning. If you choose to spray WD-40 on your brakes, it can cause damage to the rubber seals on the caliper seals and brake lines. This damage can result in hydraulic fluid leaks and potentially dangerous failures in your brake system. It’s important to note that some vehicles have drum brakes on their rear wheels. If the source of the noise is a stuck drum, using a brake lubricant instead of WD-40 is recommended. Apply the lubricant to the backing plate where the brake shoe sits and avoid applying it to the front brake rotors. Applying lubricant between the disc rotors and brake pads can significantly affect the performance of your disc brakes and potentially lead to an accident.

Tesla Under Investigation by NHTSA for Steering Issues

Tesla is once again facing scrutiny from the National Highway Traffic Safety Administration (NHTSA), this time for steering issues. According to the NHTSA’s investigation overview, drivers have been receiving messages indicating reduced or disabled power steering assist. Complaints have included incidents where restarting the car only partially restored steering capability, or drivers needed to make multiple attempts. One complaint even reported a situation where the steering felt stuck, causing the car to slide off the road and crash into a tree. Additionally, Tesla’s lane assistance and emergency features were said to have malfunctioned in this particular incident. Other cases described the steering wheel becoming overly stiff or completely locked.

While some Tesla owners have been able to regain full or partial steering functionality through restarts or multiple on-off attempts, many are concerned about the risk of being stranded in a sensitive traffic or highway situation. This poses not only a safety concern for themselves, but also for other vehicles around them. This is not the first time Tesla has faced steering-related issues with their electric SUV. In June 2023, a batch of Model Y cars were recalled due to steering wheel problems. Three months prior to that, the NHTSA launched an investigation into reports of steering wheels actually falling off while driving, affecting approximately 120,000 Model Y cars from the 2023 cycle.

BMW M Motorsport News, 24th July 2023

Björn Lellmann, Head of Customer Racing at BMW M Motorsport:

“In this issue of our newsletter, there is one topic that really stands out from my perspective: We have experienced an incredible winning streak with our new BMW M4 GT4 these past two weeks. Whether in Europe, Asia, or the USA, the car was almost unbeatable in the hands of our BMW M Motorsport teams and drivers. I’m delighted that it seems we have managed to make the second generation of the BMW M4 GT4 even more successful than its highly decorated predecessor. Everyone at BMW M Motorsport who was involved in the development of the car can be very proud of this achievement. I’d like to congratulate all the winners of these past weeks and am already looking forward to seeing what the rest of this season has in store!”

ADAC GT Masters: Marco Wittmann and Project 1 on the Podium at the Nürburgring.

The third event of the ADAC GT Masters 2023 season took place at the Nürburgring (GER), where BMW M works drivers Marco Wittmann (GER) and Neil Verhagen (USA) participated. Wittmann and Sandro Holzem (GER) from the Project 1 team secured a podium finish, moving from tenth on the grid to finish in fourth place in the first race, and starting from fourth on the grid in the second race to secure a second-place finish.

Wittmann commented on his ADAC GT Masters debut, saying that it was a positive experience and that he and Holzem performed well as a team. Verhagen filled in for Igor Walilko (POL) in the FK Performance Motorsport BMW M4 GT3 and finished in seventh and ninth places in the two races. Schubert Motorsport’s BMW M4 GT3 driven by Eduardo Coseteng (PHI) and Ben Green (GBR) finished in eighth and sixth places.

GT4 European Series: BMW M4 GT4 dominant at Misano.

The BMW M Motorsport teams dominated the GT4 European Series at the fourth round held in Misano, Italy. Michael Schrey (GER) and Gabriele Piana (ITA) from Hofor Racing by Bonk Motorsport drove from 14 on the grid to victory in the first race, while Berkay Besler (TUR) and Tom Edgar (GBR) from Borusan Otomotiv Motorsport secured a one-two result in the second race. Schrey and Piana lead the drivers’ championship, and Hofor Racing by Bonk Motorsport is at the top of the team standings.

IMSA: Turner Motorsport narrowly miss out on podium at Lime Rock Park.

In the IMSA WeatherTech SportsCar Championship race at Lime Rock Park (USA), Robby Foley and Patrick Gallagher (USA) from Turner Motorsport finished in fourth place in the GTD class in their BMW M4 GT3. Bryan Sellers and Madison Snow (USA) from Paul Miller Racing came in eighth place, maintaining their lead in the driver and team standings of the GTD category. Bill Auberlen and Chandler Hull (USA) from Turner Motorsport finished eleventh. The next IMSA race will take place at Road America (USA).

VP Racing Sports Car Challenge: All podium positions go to BMW M4 GT4 teams.

At Lime Rock Park (USA), the BMW M4 GT4 teams dominated the VP Racing Sports Car Challenge. AutoTechnic Racing took all six podium positions over the weekend, with John Capresto-Dubets (USA) leading the way with a one-two-three finish in the GSX class. Francis Selldorff and Vincent Barletta (USA) from Turner Motorsport secured fourth and fifth places.

British GT Championship: GT4 class win for Century Motorsport.

Michael Johnston and Chris Salkeld (GBR) from Century Motorsport celebrated their first GT4 class win in the British GT Championship at Portimão (POR). They currently lead the Pro-Am driver standings, and Century Motorsport is at the top of the team standings. In the GT3 race, Dan Harper and Darren Leung (GBR) finished fifth in their BMW M4 GT3 and are in second place in the driver standings.

GT World Challenge Asia: Four GT4 wins in four races for BMW M Team Studie.

Team YZ Racing with BMW M Team Studie had a successful doubleheader at Suzuka and Motegi (JPN), winning all four races in the GT4 category. Masaki Kano and Manabu Orido (JPN) lead the overall standings for their class. In the GT3 class, PLUS with BMW M Team Studie faced challenges and finished twelfth and tenth at Suzuka and retired from both races at Motegi.

Sim racing: Team BMW Bank wins 24h Spa on iRacing.

Team BMW Bank emerged victorious in the 24-hour race of Spa-Francorchamps (BEL) on the sim racing platform iRacing. Rainer Talvar (EST), Phillippe Denes (USA), and Felix Quirmbach (GER) from BMW M Team BS+COMPETITION took turns driving the BMW M4 GT3 and crossed the finish line with a comfortable lead. Team BMW Bank has previously won the 24-hour race at the Nürburgring on iRacing. Team BMW Redline also performed well but had to retire due to a collision.