The Apple Watch does loads, which can be a blessing and a curse. Perhaps its hottest options are its numerous health-tracking applied sciences which have turn out to be widespread in most trendy smartwatches. However, typically these options can run into issues.
If you have begun to note your steps aren’t being counted correctly, or are having hassle getting the step counter to work appropriately within the first place, don’t fret about it an excessive amount of. As irritating as the problem could also be, there’s in all probability a easy trigger behind it that is simple to repair.
Of course you first should slim down the chances, and that requires somewhat little bit of trial and error. If you believe you studied one thing specifically then by all means begin there first. Otherwise, we advocate following the checklist beneath. It’s organized with the only and quickest potential options first, adopted by the extra concerned, probably data-wiping strategies in the direction of the tip. Why spend a number of minutes restarting or recalibrating if it seems the issue is only a unfastened wristband, proper?
Adjust or clear
Sometimes your Apple Watch’s step counting troubles might be mounted with out the necessity to restart something and even delve into the Settings. So earlier than you dig into any menus, attempt these steps first:
- It’s attainable that your Apple Watch is not on “right.” Apple recommends positioning the watch slightly below your wrist (previous the wrist bone, in the direction of your elbow). The firm additionally recommends you retain the band comfortable sufficient that the sensors on the again of the watch are in fixed contact together with your pores and skin.
- If the Apple Watch is positioned round your wrist bone, slide it again in the direction of your elbow. If you shake your arm and flip it the other way up and the watch’s again sensors are not touching your pores and skin, tighten the strap somewhat extra. If you are utilizing one of many included bands and the match has gotten unfastened, bear in mind Apple has changed its return policy for bands like the Solo Loop through the years.
- Your watch’s sensors might also be what’s inflicting step-counting errors, wherein case you will want to wash them. Fortunately, it is easy to clean your Apple Watch with just a few simple steps.
If your Apple Watch is locked whereas in your wrist, that would additionally interrupt step counting. Open the Watch app in your paired iPhone and choose the watch, then select Passcode and toggle on the Unlock with iPhone swap.
Restart every thing
If adjusting, cleansing, or unlocking the Apple Watch would not clear up the issue, it is time for the most typical repair even essentially the most superior techies have a tendency to make use of: Restarting.
- Restart your iPhone.
For iPhones predating the iPhone X, press and maintain the ability button (this will probably be on prime for the iPhone 5, first technology SE, or older and on the aspect for the iPhone 6, 7, 8, and second and third technology SE) till the Power Off slider seems. Tap and drag the Power Off slider to the aspect and look ahead to the cellphone to show off, then press and maintain the ability button till you see the Apple brand.
For an iPhone X and newer, press and maintain each the aspect button and one of many quantity buttons till the Power Off slider seems, then drag the slider to the aspect and look ahead to the cellphone to energy down. After which, press and maintain the aspect button till the Apple brand seems.
- After restarting the cellphone, restart the Apple Watch by urgent and holding the aspect button till the Power Off slider seems. Tap and drag the slider to show off the watch, wait till it is shut down, then press and maintain the aspect button once more till the Apple brand seems.
Be positive to restart the iPhone first, then restart the Apple Watch. Otherwise, the Watch app might have hassle connecting with the Watch, which might result in much more issues.
Check your settings
There’s additionally an opportunity that your Apple Watch settings are getting in the best way of the step counter. Here’s what to verify:
- Incorrect or outdated well being data may throw off well being monitoring (together with steps). Open the Watch app in your iPhone and choose My Watch > Health > Health Details. Look over your data, and if something is inaccurate faucet Edit to make the mandatory adjustments.
- Apple Watches use Wrist Detection by default to lock the system as soon as it is taken off (for safety functions), however this might trigger the watch to lock itself by mistake if it thinks you are not carrying it. Open the Settings app on the Apple Watch > Passcode, then flip off the toggle for Wrist Detection to close the characteristic off.
- If Location Services have been by accident turned off, that would additionally mess with the accuracy of the step counter. Open Settings on the paired iPhone > Privacy > Location Services and ensure the toggle is on.
- While trying into Location Services in your iPhone, you may additionally need to take a look at your Motion Calibration settings. From the Location Services > System Services > Motion Calibration & Distance. If it is turned off, faucet the toggle subsequent to it to show it on.
More fundamental troubleshooting
If you have executed every thing above and nonetheless having hassle, then it is time to transfer on to different troubleshooting mainstays.
- Try closing the apps on your Apple Watch. It’s attainable these apps could possibly be interfering with the step counter, notably if the app wasn’t made by Apple.
- You may recalibrate the Apple Watch by opening the Watch app in your iPhone > My Watch > Privacy > Reset Fitness Calibration Data.
- Another choice is to factory reset your Apple Watch, which removes all the info however retains it linked to your Apple account. Go to the Settings app in your Apple Watch, then General > Reset > Erase All Content And Settings > Enter your passcode. After it resets, look ahead to a immediate asking to arrange an Apple Watch (if you happen to do not see one, restart the iPhone). Then arrange your Apple Watch like regular.
- A final resort is to unpair the Apple Watch from your iPhone. You can do that within the Watch app by deciding on My Watch > All Watches (on the prime). Tap the Info (i) icon subsequent to your watch and choose Unpair Apple Watch, then affirm. After every thing restarts, pair the Apple Watch to your iPhone as regular.
If none of those strategies have resulted in a extra correct step depend, it could be time to get in contact with Apple Support.
