Tag Archives: releases

Motorsport

First Tesla Cybertruck Crash On Public Roads Leaves Driver With ‘Minor Injuries’

The Tesla Cybertruck has been one of many greatest automobile releases of 2023. Now that they’re trickling out to keen deposit holders and Tesla continues to check them, it was solely a matter of time till one was crashed on public roads. The first one occurred yesterday, and it seems it held up relatively nicely.

The California Highway Patrol reported that the incident occurred on December 28 at round 2:05 PM native time on State Route 35, also called Skyline Boulevard, exterior San Jose. A driver in a Toyota Corolla went off the street and got here again throughout the double yellow line to strike the Cybertruck going the opposite course.

The Cybertruck driver suffered minor accidents however did not require an ambulance to go to the hospital, the California Highway Patrol instructed The Autopian. The two passengers within the pickup weren’t harm. The Corolla driver was unhurt.

 

Photos of the incident (above) recommend the Corolla sideswiped the Cybertruck. There are deep scratches alongside the pickup’s driver’s facet, and the fender cladding across the wheels is lacking. The influence was exhausting sufficient to trigger the EV’s facet curtain airbag to deploy.

The Corolla incurred rather more vital harm. However, it is unclear how a lot of the destruction got here from initially leaving the street and what quantity the influence with the Cybertruck prompted. The Toyota’s driver facet took the brunt of the hurt, suggesting this was from sideswiping the Tesla.

 

A dashcam video (under) from the crash scene gives one other have a look at the crash scene. The Corolla ended up with its nostril pointing in the direction of the street. The Cybertruck was blocking a site visitors lane with its nostril off the shoulder.

There’s not a ok have a look at the Cybertruck to know whether or not the pickup is repairable. According to the Tesla parts catalog, a entrance fender prices $550 plus set up. The entrance fascia and powered frunk are a complete of $2,845.75.

When Tesla launched the production-spec Cybertruck, Elon Musk touted it as “much safer per mile” than the opposite vehicles within the class. “Because the center of gravity is so low, it doesn’t roll over,” he stated.

However, critics pushed again as a result of a crash check video indicated the Cybertruck did not have enough crumple zones to be protected in a head-on collision. There has been no unbiased testing from teams just like the Insurance Institute for Highway Safety to guage the EV’s security presently.

News

Stylmartin To Dazzle With New Models For 2024 At EICMA

With EICMA just around the corner, the industry is abuzz with new releases and innovations. We’ve talked about exciting new products from multiple brands such as MV Agusta and Husqvarna, however, it isn’t just motorcycle manufacturers who are set to put up a show in the expo. Indeed, EICMA is just as much about gear and accessories as it is about the bikes themselves, so expect some of the biggest brands to showcase their innovations, too.

Stylmartin To Dazzle With New Models For 2024 At EICMA

Speaking of gear, Stylmartin, a popular Italian brand specializing in motorcycle-specific boots and sneakers, has confirmed its attendance at EICMA and will be showcasing its 2024 collection. The brand states that it has a wide range of new footwear to debut, including new releases in both WP and Air versions. For starters, it says that it will be launching a new colorway of the iconic Iron WP sneaker, as well as introducing the new Zed trainers. Both of these new models are protective and stylish, utilizing a high-traction Michelin sole and D3O inserts for top-notch safety.

Next up, for the 2024 model-year, Stylmartin will be launching the Piper sneakers in two versions – WP and Air. The WP version features a waterproof membrane for all-weather riding, while the Air version features water-repellent leather with fabric parts for extra breathability in warm weather. Like the models before it, the Piper also features a Michelin sole, ensuring optimal traction on all surfaces.

For the urban rider, the Atom Evo is designed to combine comfort, safety, and style in a versatile design that’s ideal for the urban jungle. It features a water-repellent outer constructed with breathable mesh fabric and greased leather inserts for abrasion resistance. Lateral reflex inserts provide extra safety, protecting the foot from impact and twisting forces in the event of a crash.

Among the returning models for 2024 is the Vertigo, a riding shoe inspired by the world of outdoor exploration. Apart from being protective on the bike, the Vertigo is designed with versatility in mind, providing all-terrain walking stability with the technical features and safety technology of a motorcycle-specific shoe. It will be available in both WP and Air versions.

Stylmartin’s display will be located at Stand M39, Hall 15, at EICMA, which is scheduled to run from November 7 to 12, 2023.

Stylmartin To Dazzle With New Models For 2024 At EICMA
Stylmartin To Dazzle With New Models For 2024 At EICMA
Motorsport

2024 Honda Civic Hybrid Sedan Production Set for Spring 2024

Honda has provided more details about the upcoming release of the Civic hybrid in the US market. The popular model will be offered in both sedan and hatchback versions, joining the CR-V and Accord hybrids in Honda’s lineup of electric vehicles in America.

The Civic Hybrid sedan is scheduled to go into production in the spring of next year at Honda’s plant in Ontario, Canada. Following this, the hatchback variant of the model will be manufactured at Honda’s Indiana Auto Plant. The two-motor electric powertrain will be produced by Honda Transmission Plant in Ohio, while the 2.0-liter Atkinson-cycle gas engine will be made at the Anna Engine Plant, also located in Ohio.


Consoles, News

Atari is Releasing a Long-Lost Console Game that Resurfaced after 30 Years

Atari is coming out with “Save Mary,” the latest addition to their limited-edition Atari XP series featuring actual 2600 cartridges. These cartridges are newly produced in the United States using high-quality materials and rigorous manufacturing standards. Although “Save Mary” isn’t the first game to be rescued from the pile of cancelled late-stage 2600 games, it follows the release of “Mr. Run and Jump” earlier this year.

The gameplay of “Save Mary” revolves around constructing a platform for the character Mary to escape a flooding canyon. The game was highly anticipated during its development and even received praise from Atari founder Nolan Bushnell in a 1989 interview with Atarian, an Atari-focused magazine.

In the interview, Bushnell mentioned, “Then there’s one called ‘Saving [sic] Mary’ which I really like. It is the first game in which you rely on construction rather than destruction to save the princess. You build towers at the base of a river gorge to keep Mary out of the water, which is constantly rising. You have an unlimited supply of building materials, but you can lose a life by either squashing Mary with a piece of building material or building so slowly that you fail to get her out of the water and she drowns. The guilt you feel is tremendous.”

Interestingly, “Save Mary” has been available to the public as a ROM dump for many years since prototype cartridges were discovered in 1997.

Motorsport

Miniature Audi RS3, BMW M5 Sports Sedans Look Ready To Carve 1/18 Scale Corners

In the world of automotive enthusiasts, there exists a realm where passion and precision converge on a smaller scale. We’re talking about the world of automotive scale models, a topic we often discuss here at Motor1.com. In this instance, we have a new video showcasing impeccably detailed 1/18 scale models of various modern sports sedans that we’d like to share with you.

Although these miniature marvels may appear to be ready for high-speed maneuvers on the track, they are not actual vehicles but meticulously crafted scale models made by renowned companies like Norev, GT Spirit, and others. The video showcases vehicles such as the Mercedes-AMG GT63, BMW M5, Alfa Romeo Giulia GTA M, and the Audi RS3 by ABT, offering a glimpse into the world of collecting miniature cars. This hobby extends beyond mere child’s play.

For many enthusiasts, collecting scale models is a passionate pursuit driven by a desire to own and appreciate iconic automotive designs in miniature form. Even the most popular and affordable models exhibit great attention to detail, while masterpieces like the Ferrari 296 GTS by Amalgam Collection are true works of art. Collecting scale models is more than just filling a shelf with cars – it’s about capturing a piece of automotive history in miniature and preserving the beauty and heritage of iconic vehicles.

These miniatures also serve as a way for car enthusiasts to celebrate their love for specific brands, models, or racing legends. The scale model collecting community is vibrant and passionate, with collectors frequently attending events, auctions, and trade shows dedicated solely to these miniature treasures.

Similar to full-size car enthusiasts, scale model collectors seek rare and limited-edition pieces to add to their collections, fostering a culture of exclusivity and appreciation for craftsmanship. Additionally, the collecting world provides a platform for sharing knowledge and stories about the cars they admire. Enthusiasts often engage in discussions about the history, performance, and technical details of real cars. Some even enjoy restoring scale models in painstaking detail.

News

Watch: Custom Honda SCL500 By Steady Garage

Steady Garage has released a video showcasing a custom build of the SCL500 that will make you want a new scrambler. This is one of the first custom makeovers of the SCL500 that we’ve seen in the States.

The SCL500, also known as the CL500 in other regions, was recently unveiled by Honda and made available. This scrambler from Big H is based on the Rebel 500, featuring a 471cc parallel-twin engine with a 180-degree crank, producing around 45.5 horsepowers and paired with a six-speed transmission.

While the Rebel 500 is an easy-to-ride beginner bike with a low ground clearance, it does have some design limitations due to its shared engine with other Honda models. That’s where Steady Garage comes in to give it a unique makeover.

Custom Honda SCL500 By Steady Garage

The video showcases the entire build process, from unboxing the SCL500 to the final customized version, without any commentary. Steady Garage starts with a teardown, uses computer-aided design (CAD) for planning, and then proceeds to metal fabrication. The end result is a set of quality parts specifically fitted for the SCL500, along with several upgrades.

Some notable upgrades include a skid plate that adds a rugged scrambler look to the bike, hand guards, engine crash guards, and luggage racks designed in the same style as the skid plate. The custom build also features a front Brembo brake caliper, wire-spoke wheels, new contact points such as a Pro-Taper handlebar and brake master cylinder, a Vance & Hines exhaust, and Shinko tires.

The before and after shots in the video highlight the transformation of the SCL500, particularly the change of the tank paint job from bright orange to green and yellow with a custom design. This custom build by Steady Garage promises to make the SCL500 a favorite in the custom scene.

News

AGV Introduces The Redesigned K3 Full-Face Helmet

Italian helmet manufacturer AGV has announced the introduction of their newest helmet, the K3. The K3 is a revival of an older model but features a completely redesigned look and improved performance.

The new K3 model has a more contemporary aesthetic, with contoured lines on the sides and top that give it a sporty appeal. The air intakes at the chin bar and the air inlets on the top of the helmet provide a more streamlined appearance. The facia has been updated to give it a more modern and tour-like look.



 AGV Introduces The Redesigned K3 Full-Face Helmet

The AGV K3 features technical improvements that enhance its performance. The helmet’s thermoplastic shell comes in three different sizes, ensuring a comfortable and customized fit. Its four-density EPS lining effectively absorbs and disperses impacts. The contoured sides of the helmet provide additional protection for the collarbone in case of an accident. The AGV K3 is ECE R22.06 approved, indicating that it meets the latest safety standards.

The interior of the AGV K3 is detachable and washable, with 2Dry fabric that helps keep the helmet fresh. The helmet also has grooves specially designed for eyeglasses, adding to its overall convenience.

When it comes to visibility, the AGV K3 features a clear anti-scratch and anti-fog screen that offers a broad 190-degree field of vision. It also has the XQRS system, which allows for quick and easy screen removal, as well as micro-openings for increased ventilation during city riding. The visor is compatible with the Pinlock 70 anti-fog film, enhancing vision in wet and cold weather. Additionally, it has a drop-down sun visor for sunny days.



 AGV Introduces The Redesigned K3 Full-Face Helmet

The AGV K3 helmet features a micrometric clasp chinstrap, which provides a secure and adjustable closure. This is a significant improvement over the previous model, which had a double-D ring closure, as it offers more convenience. The helmet also has a splash guard that prevents water or debris from entering from the bottom. It is also intercom-ready, making it easy to integrate with communication systems. The size M helmet weighs around 1,500 grams, providing a balance between comfort and safety.

The AGV K3 is available in various fashionable colors, including white, matte black, matte green, red, matte grey, and multiple graphic options. It is available in sizes ranging from XS to XXL, ensuring a perfect fit for riders with different head sizes. The new AGV K3 is priced at 239.95 Euros (approximately $266 USD). Availability may vary by region, so it is recommended to visit AGV’s official website or contact a local dealer for more information.