Category Archives: BMW

BMW

The all-new BMW M4 CS.

Leave a comment

The new BMW M4 CS invitations house owners to expertise the inimitable M feeling in all its depth and breadth. Its distinctive character profile locations it precisely halfway between the brand new BMW M4 Competition Coupé with M xDrive (gas consumption, mixed 10.1 – 10.0 l/100 km [28.0 – 28.3 mpg imp]; CO2 emissions, mixed: 229 – 226 g/km in the WLTP cycle, CO2 class: G) – full with its lately launched efficiency, design and gear upgrades – and the 1,000-unit limited-run BMW M4 CSL particular version (gas consumption, mixed 10.1 – 9.9 l/100 km [28.0 – 28.5 mpg imp]; CO2 emissions, mixed: 227 – 224 g/km within the WLTP cycle, CO2 class: G). The pure-bred efficiency skills of the brand new BMW M4 CS are the product of M-typical racing genes, which supply fixed reminders of their presence in on a regular basis driving on the street and revel in full expression out on the monitor.

The model-specific efficiency traits of the six-cylinder in-line engine within the BMW M4 CS, an eight-speed M Steptronic transmission and M xDrive clever all-wheel drive imbue the brand new particular version with dynamic poise and assurance in any scenario. Instantaneous energy supply and optimised traction allow acceleration of 0 to 100 km/h (62 mph) in 3.4 seconds. In testing on the Nürburgring’s Nordschleife circuit – the final word barometer for all BMW M automobiles in relation to the signature M recipe of dynamic efficiency, agility and dealing with precision – the brand new BMW M4 CS recorded an official and notarised time of seven min. 21.989 sec. for the complete 20.832-kilometre (12.943-mile) lap.

Six-cylinder in-line engine developed for motor sport .

The race-focused character of the brand new BMW M4 CS is instantly recognisable and a noticeable companion over each journey. The particular version is powered by a very muscular model of the high-revving six-cylinder in-line engine with M TwinPower Turbo expertise developed for the BMW M3/BMW M4 vary. The 3.0-litre unit has had monitor efficiency as its raison d’être from day considered one of its growth. Indeed, it additionally offers the premise for the engine within the BMW M4 GT3, which received the DTM touring automotive title in 2022 on the first time of asking and adopted that up in 2023 with general victories on the 24-hour races in Spa-Francorchamps and Dubai.

The engine within the new BMW M4 CS due to this fact additionally advantages from the event experience of BMW M GmbH and the numerous years of racing expertise that underpin it. The engine has an especially inflexible crankcase, which includes a sleeve-free, closed-deck development and is designed to deal with very excessive combustion strain. The cast light-weight crankshaft additionally shows distinctive torsional resistance, which performs a job in giving the engine its fast energy supply and urge for food for revs. The wire-arc sprayed iron coating of the likewise weight-saving cylinder bores reduces frictional losses. The cylinder head, in the meantime, has a 3D-printed core. This additive manufacturing course of permits the coolant ducts to be routed in an optimum association for temperature administration that may be unattainable to realize utilizing typical metallic casting strategies. And the system of oil provide – just like the cooling system – is designed to deal with the precise challenges of monitor use, together with persistently excessive revs and excessive lateral acceleration.

Bespoke efficiency traits, distinctive sound.

Racing expertise offers the foundations for the extraordinary potential of the six-cylinder in-line engine, which produces most output of 405 kW/550 hp from underneath the bonnet of the brand new BMW M4 CS. This represents a 15 kW/20 hp enhance over the figures achieved by the engine within the BMW M4 Competition Coupé with M xDrive. The energy increase was achieved by way of focused revisions to the engine’s M TwinPower Turbo expertise and required no concessions by way of stability or sturdiness. The changes primarily concerned elevating the utmost cost strain of the 2 mono-scroll turbochargers to 2.1 bar and making some model-specific tweaks to the engine administration.

The upgrades additionally produce a really particular tackle acquainted M efficiency traits, with instantaneous energy supply that continues unabated by way of to the higher echelons of the rev vary a very dominant theme. The engine within the new BMW M4 CS places its peak torque of 650 Nm (479 lb-ft) on faucet from simply 2,750 rpm as much as 5,950 rpm. It develops most output at 6,250 rpm and has a 7,200 rpm purple line. Contributing to the wonderful engine response is a model-specific engine mounting with elevated spring charges. The inflexible connection between the ability unit and the automobile’s construction permits notably direct transmission of its energy to the drivetrain each time the driving force presses the accelerator.

The immediately accessible energy and high-revving character of the engine pave the way in which for imposing acceleration figures. The new BMW M4 CS dashes from 0 to 100 km/h (62 mph) in simply 3.4 seconds, whereas 0 to 200 km/h (124 mph) takes 11.1 seconds. The mid-range dash from 80 to 120 km/h (50 – 75 mph) is handled in 2.6 seconds in 4th gear and in 3.3 seconds in fifth gear. The high velocity of the particular version – which comes as commonplace with the M Driver’s Package – is electronically restricted to 302 km/h (188 mph).

The engine’s energy supply is accompanied by the emotionally stirring soundtrack generated by the dual-branch exhaust system, which options electrically managed flaps, a titanium rear silencer with weight-minimising design and – in customary M vogue – two pairs of tailpipes painted in matt Black. The engine’s acoustic presence adjusts to the powertrain setting chosen by way of the M Setup menu. In SPORT and SPORT+ modes, the engine notice positive aspects unmissable racing automotive undertones. This injects real aural drama into proceedings, notably throughout gear adjustments and the accompanying changes in rev velocity.

Eight-speed M Steptronic transmission, M xDrive and lively M differential convert excellent energy into imposing efficiency.

The engine’s drive torque is relayed to all 4 wheels of the brand new BMW M4 CS by way of an eight-speed M Steptronic transmission with Drivelogic. This is operated utilizing both the M-specific gear selector lever on the centre console or the carbon-fibre shift paddles on the steering wheel. The Drivelogic button built-in into the selector lever permits the driving force to change the transmission’s shift traits as desired, with a alternative of settings accessible: one comfort-oriented, one for sports activities efficiency and one optimised particularly for monitor use.

The engine’s energy is channelled onto the street by the M xDrive system. This clever all-wheel-drive expertise makes use of an electronically managed multi-plate clutch within the switch case to distribute the engine’s energy easily between the entrance and rear wheels – and so maximise traction, agility and directional stability in any scenario. The multi-plate clutch’s oil provide has been optimised to make sure the all-wheel-drive system continues to carry out successfully even throughout ultra-intense monitor classes.

The M xDrive system’s rear-wheel bias and the way in which it groups up with the Active M Differential on the rear axle – whose operation can also be absolutely variable – add to the signature M feeling when accelerating or powering by way of corners. Furthermore, the M Setup menu permits 4WD Sport mode to be chosen, which directs a good higher proportion of the engine’s torque to the rear wheels. Drivers can even change off the DSC (Dynamic Stability Control) system altogether and interact pure rear-wheel drive by way of 2WD mode. This engages expert drivers within the driving expertise to an much more intense diploma.

Model-specific tuning for the chassis expertise and management methods.

The chassis expertise for the brand new BMW M4 CS has been tuned exactly to the efficiency traits of the engine, the general automobile idea and its weight distribution. The individually tuned axle kinematics and bespoke wheel camber settings, dampers, auxiliary springs and anti-roll bars serve to optimise steering precision, transmission of lateral management forces when cornering, spring and damping response and wheel location.

The electronically managed dampers of the adaptive M suspension on the brand new BMW M4 CS likewise are available a model-specific setup, as do its electromechanical M Servotronic steering with variable ratio and its built-in braking system. The settings for the DSC system and M Dynamic Mode have additionally been purposefully geared to the precise calls for of dynamic circuit driving. M Dynamic Mode provides drivers additional leeway to discover the automotive’s dynamic limits by pushing again the intervention factors for the DSC system’s numerous stabilising measures. When the driving force adopts an especially sporty driving type, the resultant wheel slip ensures even higher energy transmission and helps to propel the automotive down the street with additional assurance.

Exclusive cast light-alloy wheels and monitor tyres fitted as commonplace.

The special-edition mannequin is provided as commonplace with M Compound brakes with callipers painted in a alternative of Red or Black. The callipers for the elective M Carbon ceramic brakes could be laid out in a Red or matt Gold painted end. The new BMW M4 CS additionally comes as commonplace with cast M light-alloy wheels in an unique V-spoke design – accessible in both in matt Gold Bronze or matt Black.

The light-weight wheels (19-inch on the entrance axle and 20-inch on the rear) are fitted as commonplace with monitor tyres (extremely monitor tyres as choice) to maximise the efficiency expertise on the race monitor. Offering excellent lateral management and directional stability, exact steering really feel and optimum traction, these monitor tyres – within the dimensions 275/35 ZR19 (entrance) and 285/30 ZR20 (rear) – symbolize a compelling proposition, even when the driving force resides out their sporting ambitions on a circuit. Customers intending to make use of their BMW M4 CS largely for day-to-day driving can choose high-performance tyres in the identical sizes as a no-cost choice.

Intensive utility of light-weight design with beneficiant use of CFRP.

Extensive light-weight design measures play a serious half in moulding the efficiency qualities and unique character of the brand new BMW M4 CS. The use of parts produced from carbon fibre-reinforced plastic (CFRP) is of key significance right here. The carbon-fibre roof is a chief instance, its low weight bringing the automotive’s centre of gravity nearer to the street and due to this fact enhancing agility and cornering dynamics. The bonnet, entrance splitter, entrance air intakes, exterior mirror caps, rear diffuser and Gurney-style rear spoiler are additionally produced from this light-weight, high-tech materials.

Adherence to the precept of clever light-weight design can also be evident within the inside. Indeed, within the pursuits of decreasing weight contained in the cockpit, the centre console, shift paddles on the steering wheel and inside trim components are all produced from CFRP. The special-edition mannequin additionally comes as commonplace with M Carbon bucket seats, whose weight-minimising development is highlighted by means of CFRP within the structural components of the seat cushion and backrest in addition to within the eye-catching cut-outs within the facet bolsters and under the pinnacle restraints. Added to which, the exhaust system on the brand new BMW M4 CS is greater than 4 kilograms lighter, because of using a titanium rear silencer. All in all, light-weight design measures carry the automotive’s weight down by round 20 kilograms in comparison with the BMW M4 Competition Coupé with M xDrive.

Optional M entrance finish strut brace maximises torsional rigidity.

An M entrance finish strut brace – additionally engineered for lightness – could be specified as an choice for the BMW M4 CS to extend torsional rigidity and enhance dealing with by way of dynamically taken corners. The forged aluminium components connecting the spring strut towers to the entrance finish characteristic a weight-optimised geometry that has been exactly matched – with the assistance of numerical fashions – to the forces utilized in numerous driving conditions.

Exclusive design options promise thrilling efficiency.

The new BMW M4 CS immediately pronounces its sharper character with a sequence of particular person design options. The new BMW Individual particular paint finishes Riviera Blue and Frozen Isle of Man Green Metallic can be found solely for the newest special-edition mannequin from BMW M GmbH. Surfaces in uncovered carbon fibre for the roof and the pair of indents chiselled into the bonnet showcase the fabric’s distinctive construction, as do the entrance splitter, entrance air intakes, M exterior mirror caps, rear spoiler and rear apron. Together with the Black facet skirts and M gills, the CFRP components present a surprising distinction in opposition to the daring new paint finishes. The new BMW M4 CS can be specified within the exterior shades M Brooklyn Grey metallic and Sapphire Black metallic.

The automobile’s entrance finish sports activities a weight-saving, frameless BMW kidney grille with a stripped-back really feel paying homage to racing machines. Designed particularly for this mannequin, its figuring out options embrace purple contour strains and the “M4 CS” badging on the higher of the 2 horizontal grille bars. Both the mannequin badge on the entrance and its counterpart on the boot lid have black surfaces with a purple border.

Eye-catching headlights add one other flourish to the entrance finish of the brand new BMW M4 CS. Their sculptural gentle icons illuminate yellow as an alternative of white – each throughout the Welcome Light Animation and whereas low beam or excessive beam is switched on – and so reference profitable GT racing automobiles. The tail lamps of the BMW M4 CS make a visually highly effective assertion with their putting look throughout the dead nights. As nicely as producing a strong radiance, their Laserlight expertise can also be marked out by intricate fibre optic bundles inside the sunshine items, which have a “free-floating” look and are illuminated by a laser diode. The result’s a outstanding 3D impact. This expertise was first seen within the BMW M4 CSL high-performance particular version produced in a restricted run of 1,000 items, and now additionally brings an unique aesthetic to the BMW M4 CS.

Racing aptitude within the cockpit: M Carbon bucket seats with unique design cues.

Exuding a puristic visible attraction, the cockpit of the BMW M4 CS focuses squarely on delivering an exhilarating driving expertise, whereas additionally efficiently mixing its distinct racing aura with consolation options for on a regular basis driving – because of high-quality supplies and unique design components. The commonplace M Alcantara steering wheel in three-spoke design with a flat-bottomed rim provides an ideal mixture of safe grip for dynamic driving manoeuvres and spectacular consolation on longer journeys. Its purple centre marker and CFRP shift paddles add an genuine racing flavour to the cockpit. The commonplace M Carbon bucket seats in a model-specific design additionally fuse racing-car really feel and long-distance consolation to distinctive impact. Fully electrical and heated, they characteristic integral head restraints and an illuminated mannequin badge.

The M Carbon bucket seats within the BMW M4 CS are upholstered in Merino leather-based and are available an unique design with a Black/Red color scheme and distinctive distinction stitching. This bi-colour end is carried over into the rear compartment of the high-performance sports activities automotive. Both the door panels within the entrance and the rear facet panelling are trimmed completely in Black leather-based. Red “CS” lettering on the centre console, M seat belts with distinction stitching within the BMW M GmbH colors, an Anthracite-coloured headliner, inside trim strips in Carbon Fibre end and door sill plates with the inscription “M4 CS” all add to the unique atmosphere contained in the automotive.

BMW Curved Display with M-specific readouts, new BMW iDrive.

The newest model of the BMW iDrive show and management/operation system primarily based on BMW Operating System 8.5 offers intuitive management of quite a few automobile features and digital providers. The BMW Curved Display options M-specific readouts and is angled in the direction of the driving force, serving to them to give attention to the street forward. The absolutely digital display grouping is fashioned by a 12.3-inch data show behind the steering wheel and a management show with a display diagonal of 14.9 inches. The acquainted M Shift Lights seem on the high of the knowledge show, whereas the driving stability system, M xDrive and traction management modes are all indicated within the decrease space. Special widgets containing data on the present automobile setup, in addition to tyre pressures and temperature could be added to the management show’s dwelling display.

The upgraded BMW iDrive additionally includes the BMW Intelligent Personal Assistant and has been designed with explicit emphasis on contact and voice management. Besides the M-specific graphics, the system additionally now includes a new manner of working the automated local weather management: the temperature and air flow settings in addition to the seat heating could be managed both by contact utilizing a particular menu choice within the decrease space of the management show or by voice command.

Setup button for customising automobile configuration, M Drive Professional with M Drift Analyser and M Laptimer as commonplace.

The M-specific Setup button on the centre console permits direct entry to the settings choices for the engine, chassis, steering, braking system and M xDrive. Two individually configurable setup variants could be saved completely, along with the popular settings for the engine notice, the DSC system, the Automatic Start/Stop perform and the shift traits of the eight-speed M Steptronic transmission, after which retrieved utilizing one of many two M buttons on the steering wheel.

Also fitted as commonplace within the new BMW M4 CS is the M Drive Professional system. This contains track-optimised features such because the M Drift Analyser, which evaluates and data purposefully executed cornering slides, and the M Laptimer, which offers detailed knowledge on laps of the monitor and permits sporty-minded drivers to share their exploits with the group. It moreover comes with M Traction Control, whose ten levels additionally play their half in serving to drivers benefit from the pleasure of driving the automotive enthusiastically on the monitor.

The M Mode button on the centre console is one other device within the M Drive Professional bundle and can be utilized to regulate each driver help system responses and the content material proven within the data show and Head-Up Display. As nicely because the ROAD and SPORT settings, the BMW M4 CS additionally provides a TRACK mode designed solely to be used on race circuits.

Top-class choices for added pleasure and luxury in on a regular basis driving.

The specification of the usual BMW Live Cockpit Professional contains the BMW Head-Up Display with M-specific graphics, the cloud-based BMW Maps navigation system, smartphone integration, telephony with wi-fi charging and a WiFi interface. The BMW Drive Recorder is on the market as an choice.

The new BMW M4 CS moreover provides clients a choose alternative of consolation options and driver help methods, with the main target firmly on the enjoyment of unadulterated driving pleasure. Comfort Access, an alarm system, two-zone automated local weather management, the Harman Kardon Surround Sound System, Park Distance Control, the Parking Assistant, Front Collision Warning, Lane Departure Warning and the Speed Limit Info system are all included as commonplace, whereas automated boot lid operation and the Driving Assistant system could be added as choices.

BMW

FIA WEC at Spa-Francorchamps, IMSA at Laguna Seca: Second consecutive double-header weekend.

Leave a comment

Spa-Francorchamps/Laguna Seca. For the second consecutive time, BMW M Motorsport is dealing with a double-header race weekend within the FIA World Endurance Championship (FIA WEC) and the IMSA WeatherTech SportsCar Championship (IMSA Series). At Spa-Francorchamps (BEL), Belgian BMW M Team WRT will compete with two BMW M Hybrid V8s and two BMW M4 GT3s in its residence race within the FIA WEC. At Laguna Seca (USA), the fourth IMSA race of the 12 months is on the schedule. BMW M Team RLL will enter two BMW M Hybrid V8s within the race. Paul Miller Racing and Turner Motorsport will begin with the BMW M4 GT3 within the GTD lessons.

 

FIA WEC: Home race for BMW M Team WRT in Belgium.

After the house race comes one other residence race. After BMW M works driver Valentino Rossi (ITA) lately thrilled Italian followers at Imola (ITA), it’s now his group’s flip. At Spa-Francorchamps, BMW M Team WRT tries to proceed the clear upward development within the FIA WEC in entrance of the Belgian residence crowd. After sixth place for Robin Frijns (NED), René Rast (GER), and Sheldon van der Linde (RSA) with the #20 BMW M Hybrid V8 at Imola, the purpose is to additional set up themselves within the main group among the many hypercars within the third race for the reason that comeback. Raffaele Marciello (SUI), Dries Vanthoor (BEL), and Marco Wittmann (GER) will compete within the sister #15 automobile.

In the LMGT3 class, there was a incredible one-two end result for the 2 BMW M4 GT3s to have fun at Imola. Augusto Farfus (BRA), Sean Gelael (INA), and Darren Leung (GBR) achieved the primary victory for a BMW M Motorsport automobile within the historical past of the FIA WEC within the #31 BMW M4 GT3. Second place at his residence race went to Rossi, who shared the cockpit of the #46 BMW M4 GT3 with Maxime Martin (BEL) and Ahmad Al Harthy (OMA). Both crews now compete at Spa-Francorchamps to assault for the rostrum locations once more and gather extra factors on the earth championship. Victory on the 24-hour race in 2023 proved that the course is sweet for the BMW M4 GT3.

The race at Spa-Francorchamps begins on Saturday at 13:00 CEST.

 

IMSA Series: BMW M Team RLL goals for the primary podium of the season.

The fourth race weekend of the IMSA season takes place on the spectacular observe at California’s Laguna Seca. BMW M Team RLL has proven robust tempo with the 2 BMW M Hybrid V8s thus far this season however remains to be ready for the primary podium end. That is the purpose for Philipp Eng (AUT) and Jesse Krohn (FIN) within the #24 BMW M Hybrid V8 in addition to Connor De Phillippi (USA) and Nick Yelloly (GBR) in automobile #25.

A particular weekend awaits Turner Motorsport. Team Principal Will Turner’s squad is competing in its 557th race for BMW and is thus the BMW M Motorsport buyer group with essentially the most race entries. In honour of this milestone, the BMW M4 GT3 will carry begin quantity 557 as an alternative of the standard 96. Since 1998, Turner Motorsport has solely competed with BMW racing vehicles and has achieved quite a few prestigious victories and titles. In the GTD-Pro class, Paul Miller Racing will subject the #1 BMW M4 GT3 with BMW M works driver Madison Snow and Bryan Sellers (each USA) at Laguna Seca.

The race on the WeatherTech Raceway begins on Sunday at 21:10 CEST (12:10 native time) and lasts 2:40 hours.

 

Comments earlier than the races at Spa-Francorchamps and Laguna Seca:

 

Andreas Roos (Head of BMW M Motorsport): “We go into the third race of the FIA WEC season positively after the steps we made at Imola. In Italy, we not only celebrated the fantastic one-two result in the LMGT3 class but also saw a clear upward trend with our hypercars. We have tested at Spa-Francorchamps and want to continue the positive trend at BMW M Team WRT’s home race. In the IMSA Series, the goal is clear. We want to convert the consistently good performance of the BMW M Hybrid V8 this season into corresponding results. In the GTD class, it will be a very special weekend for Turner Motorsport. Congratulations on the 557th start in a BMW racing car and at the same time a big thank you for the decades-long loyalty to our brand. It is always a pleasure and a lot of fun to work with Will Turner and his very professional crew. The long list of victories and titles speaks for itself. Turner Motorsport is an indispensable part of BMW M Motorsport’s racing programme in North America. I hope it will stay that way for many more years!”

 

Vincent Vosse (Team Principal BMW M Team WRT): “After a good weekend at Imola, where we made a clear step forward with our hypercars and celebrated a fantastic one-two result in the LMGT3 class, we are now looking forward to our home race in the FIA WEC. The course traditionally suits the BMW M4 GT3 well, so we should be well positioned again in the LMGT3 category. For the hypercars, it’s about taking one step at a time. Hopefully, we can make the next step in front of our home fans.”

 

Dries Vanthoor (BMW M Team WRT, #15 BMW M Hybrid V8): “I am really looking forward to the home race for the team and also for me personally. There will be many fans, but also friends and family on site. We have tested again with the BMW M Hybrid V8 at Spa-Francorchamps and hopefully made further progress that we can show on the race weekend.”

 

Augusto Farfus (Team WRT, #31 BMW M4 GT3): “We want to take the momentum from our victory at Imola to Spa-Francorchamps and finish the first third of the season on a high before the 24 Hours of Le Mans. The goal is to continue on the good path we have taken and score many points for the world championship.”

 

Connor De Phillippi (BMW M Team RLL, #25 BMW M Hybrid V8): “I can’t wait to race at the WeatherTech Raceway Laguna Seca. It’s the track where I had my very first racing experiences, and I have many fond memories of this place. We had a good test on the freshly paved track a few weeks ago. I think the race will be very exciting, especially in terms of strategy.”

BMW

munich artistic enterprise week 2024 themed “How to co-create with nature”. BMW Group Design talks on aligning design and nature.

Leave a comment

Munich. Nature-driven design approaches are the principle focus of this 12 months’s munich artistic enterprise week (mcbw). “The theme of ‘How to co-create with nature’ is so interesting because it doesn’t view nature, technology and people separately, but focuses on the correlations between them,” says Adrian van Hooydonk, Head of BMW Group Design. “It fosters new types of living and working in a community, and the array of possibilities will change both the design of products and society’s interaction with them.”

New Modes IV / “New Relations with Nature”

For the BMW Group, sustainability just isn’t solely a matter of electrifying autos, but additionally shifting in direction of a constant round economic system. This strategy is about utilizing sources extra effectively, closing materials cycles and adapting design processes accordingly. This is why the BMW Group Design Team, in partnership with Die Neue Sammlung – The Design Museum, is dedicating this fourth occasion within the New Modes sequence to the subject of “New Relations with Nature”. At the panel dialogue, the interdisciplinary consultants Anna Goldhofer, Martina Maier and Johanna Seelemann will discuss how a brand new sort of relationship to nature can open up new views for design and technological progress. A round economic system knowledgeable on the BMW Group, Anna Goldhofer has been engaged on the subject from the angle of various buying and growth items for the previous six years. Johanna Seelemann heads a design studio that researches materials cultures associated to on a regular basis objects. Architect Martina Maier serves because the Sustainability Specialist at Snøhetta, a transdisciplinary studio, and is answerable for implementing sustainable methods in structure and design.

“I Am Nature”. Designing with nature in thoughts

An experimental occasion hosted on the Munich workplace of Designworks, the BMW Group’s innovation studio, will discover what it means for designers to see themselves as a part of nature. Titled “I Am Nature”, the occasion will deal with questions corresponding to how one can categorical ideas of nature in design and new aesthetic developments that come up as creatives apply a “nature mindset”.

Those preferring to discover round economic system subjects hands-on are invited to the RE:BMW Circular Lab workshops at BMW Welt.

Conversations with BMW Group consultants

As a part of the BMW Group’s continued involvement in mcbw, the 2024 speaker roster includes quite a few consultants from the corporate who will share their information at completely different occasions:

Daniela Bohlinger, Senior Expert Innovation Management of the BMW Group, will probably be a keynote speaker on the mcbw design summit. Corinna Exner, Specialist in User Interface and User Experience Design, is among the consultants from main corporations on the DDX ’24 Munich Speaker Board – Innovation & UX Conference; her matter on the occasion: “The customisation of your driving experience”. Holger Hampf, Head of BMW Group Designworks, will probably be a part of a stay occasion, DESIGNBUS: Mobility, and can present his favorite locations round Munich whereas sharing what conjures up him as he co-creates the longer term.

At the 13th rendition of Germany’s greatest design occasion, the munich artistic enterprise week brings collectively consultants, corporations and college students of design, structure and enterprise to have interaction in a cross-disciplinary debate of present developments. The BMW Group has been a devoted cooperation companion of mcbw since its launch in 2012. This 12 months’s occasion is scheduled for 11 to 19 May.

For additional programme info and to register for particular person occasions, please see the enclosed checklist or go to https://www.mcbw.de/en/program.

If you’ve got any questions, please contact:

 

Press and Public Relations

 

Michaela Martinus, Spokesperson BMW Group Design

Phone: +49-160-963-13773

Email: Michaela.Martinus@bmw.de

Steven Wörns, Spokesperson BMW Group Design

Phone: +49-151-601-16992

Email: Steven.Woerns@bmw.de

Website: www.press.bmwgroup.com

Email: presse@bmw.de

BMW

BMW M Motorsport News, sixth May 2024.

Leave a comment

Björn Lellmann, Head of Customer Racing at BMW M Motorsport:

“The BMW M Motorsport teams have celebrated numerous successes worldwide with the BMW M4 GT3, BMW M4 GT4, and BMW M2 CS Racing cars in recent weeks. We have been able to cheer for victories and podiums in Germany, Europe, North America, and Asia. This once again underlines how strong the customer racing programme is internationally at BMW M Motorsport. I congratulate all the winners and look forward to the next successes that we can celebrate together.”

—

Italian GT Championship (3rd-5th May): Hesse and Klingmann triumph at Misano.

 

The BMW Italia Ceccato Racing workforce began the Italian GT Championship season at Misano (ITA) with two victories. In the Sunday race, BMW M works drivers Max Hesse and Jens Klingmann (each GER) triumphed with the #7 BMW M4 GT3. At the identical time, within the sister #8 automobile, Pedro Ebrahim (BRA) and Federico Malvestiti (ITA) gained the Pro-Am class. In the primary race on Saturday, Hesse fought for third place till the final lap however then retired resulting from a technical defect. Ebrahim and Malvestiti completed fourth of their class. “This is a victory for the team,” stated Hesse. “The guys did an incredible job rebuilding the car after my accident following the technical defect on Saturday. Thanks to everyone for the fantastic effort!” Klingmann added: “After our big misfortune on Saturday, we managed to turn the weekend around with the victory on Sunday. It was anything but certain that we could even start. We owe this to the great work of the entire team led by Roberto Ravaglia. For me personally, it is the first victory at Misano, which I am very happy about.”

—

GTWC America (3rd-5th May): ST Racing and Turner Motorsport have a good time class victories.

Pure pleasure in Florida: At the second race weekend of the Fanatec GT World Challenge America powered by AWS, BMW M Motorsport groups celebrated a category victory in each runs. In the primary race at Sebring International Raceway, BMW M works driver Neil Verhagen (USA) and Samantha Tan (CAN) jumped onto the rostrum as third total.

The Team ST Racing duo within the #38 BMW M4 GT3 triumphed within the Pro-Am class – regardless that Verhagen needed to construct a lead over model colleagues from Turner Motorsport, Robby Foley and Justin Rothberg (each USA), resulting from a time penalty. “After the pit stop, I was on a time hunt,” defined Verhagen. “The gap I had to open was five seconds. I had Robby behind me. He also kept me on my toes.” But the lead was sufficient for Verhagen and Tan, who celebrated a particular victory. Last 12 months, the duo gained the second race at Sebring within the Pro-Am class however had to surrender the category victory afterwards resulting from a penalty. “This is the victory of the greatest redemption,” stated Tan a 12 months later. “We came back here to prove something. The team gave us an incredible car, and we made it. It feels really good.”

Foley and Rothberg made it a one-two consequence for the BMW M4 GT3 within the Pro-Am class proper behind them on Saturday. A day later, the Turner Motorsport duo themselves had been the measure of all issues when within the second race, Foley and Rothberg triumphed within the Pro-Am class. Verhagen and Tan fought their manner again impressively after a drive-through penalty within the #38 BMW M4 GT3 and topped an impressive weekend for the BMW M Motorsport groups at Sebring as third. “I think we showed everyone this weekend that our pace is undisputed. Thanks to my team, our fans, and BMW M Motorsport for the support,” praised Tan, who additionally had motive to have a good time within the Pro class. BMW M works driver Bill Auberlen and Varun Choksey (each USA) celebrated a double podium: In each races, they completed third within the #28 BMW M4 GT3 within the class.

 

—

 

GT/GT4/TC America (3rd-5th May): Podium celebrations at Sebring.

 

Justin Rothberg (USA) celebrated a premiere in GT America. In the second race at Sebring International Raceway, the American completed third within the Turner Motorsport #29 BMW M4 GT3 and climbed onto the GT America podium for the primary time. Nicolas Shanny (USA) narrowly missed the rostrum within the GT4 class twice as fourth.

In GT4 America, Zac Anderson and Colin Garrett (each USA) from Team AutoTechnic Racing climbed onto the general podium as second within the #51 BMW M4 GT4. In the Am class, Kris Wilson alongside Paul Sparta (each USA) for Team Random Vandals Racing within the #98 BMW M4 GT4 gained the second run after the duo had already celebrated a podium end with second place within the first race. Matt Million and Ryan Keeley (each USA) completed third within the Am class within the first race within the #53 BMW M4 GT4.

In TC America, Chris Walsh (USA) from Carnus Callas Raceteam was the dominant driver in Florida. In each runs, he triumphed within the #104 BMW M2 CS Racing automobile, relegating his BMW colleague Lucas Catania (USA, Team Rigid Speed) within the #17 BMW M2 CS Racing automobile to second place every time. In the second race, Aaron Kaplan (USA) within the #18 BMW M2 CS Racing automobile accomplished the pure BMW M Motorsport podium in third.

Two weeks earlier, Samantha Tan (CAN) celebrated a podium end at her private season debut in GT America. In the second run on the Long Beach (USA) road circuit, the Canadian steered her #38 BMW M4 GT4 within the GT4 class to second place. In the SRO3 class, Rothberg narrowly missed the rostrum with fourth place in each runs.

 

—

 

ADAC GT Masters (26th-28th April): Köhler and Oosten win on the season begin at Oschersleben.

 

Maxime Oosten (NED) and Leon Köhler (GER) gained the opening race of the ADAC GT Masters final weekend in April, celebrating an ideal begin to the brand new season. In the primary race at Oschersleben (GER), the #54 BMW M4 GT3 of Team FK Performance Motorsport drove from pole place to a commanding triumph. “It was a great start to the season. Maxime did a great job in the first part of the race. For me, it was about managing the lead in the second section. I am very happy about the victory,” Köhler raved after the opening success on Saturday.

In the second race on Sunday, the German-Dutch duo then fought their manner ahead from seventh on the grid, narrowly lacking the second podium end of the weekend with fourth place. Nevertheless, Köhler and Oosten left Oschersleben in second place within the drivers’ standings. Their team-mates Eduardo Coseteng (PHI) and Gregory de Sybourg (SUI) drove the #10 BMW M4 GT3 to thirteenth and tenth locations firstly of the ADAC GT Masters season.

 

—

 

ADAC GT4 Germany (26th-28th April): Piana and Schrey dominate the opener.

 

At the opening weekend of the ADAC GT4 Germany at Oschersleben (GER), Gabriele Piana (ITA) and Michael Schrey (GER) within the #2 BMW M4 GT4 had been unbeatable. Already in qualifying on Saturday, the duo from Team Hofor Racing by Bonk Motorsport distanced the competitors by greater than four-tenths – after which additionally secured the victory within the first race. Their team-mates Leon Wassertheurer and Tim Reiter (each GER) within the #3 BMW M4 GT4 accomplished the double podium for BMW M Motorsport on the season begin in third.

Piana and Schrey additionally triumphed within the second race, celebrating the second race victory of the weekend in Saxony-Anhalt. Their team-mates Reiter and Wassertheurer had began Sunday from pole place however needed to retire whereas main with injury to the wheel suspension.

Nevertheless, the BMW M Motorsport groups additionally celebrated an impressive total consequence on Sunday. Behind Piana and Schrey, 4 extra BMW M4 GT4s secured top-ten finishes. For FK Performance Motorsport, Leyton Fourie (RSA) and Max Rosam (GER) within the #46 automobile completed fifth and relegated their automobile #47 team-mates Tom Edgar (GBR) and Joseph Warhurst (GBR) to sixth place. Behind them, Markus Eichele (GER) and Phillip Wiskirchen (GER) competed within the ME Motorsport #66 BMW M4 GT4, adopted by Mohan Ritson (GBR) and Gianni van de Craats (NED) in automobile #48, one other duo from FK Performance Motorsport, ending eighth.

 

—

 

Thailand Super Series (3rd-5th May): Victory for Jesse Krohn and AAI Motorsports.

 

The Thailand Super Series season started final weekend on the Chang International Circuit in Buriram (THA). The AAI Motorsports workforce, with the help of BMW M works driver Jesse Krohn (FIN), competed with two BMW M4 GT3s. In the 2 races, there was one victory and three different podium finishes to have a good time. Krohn and his driving colleague Chun Hua Chen (TPE) gained the second race in an thrilling end with a 0.074-second lead. In the primary run, the duo completed second on the rostrum. With two second locations within the Am class, Betty Chen and Jun San Chen (each TPE) additionally had a profitable begin to the season.

 

—

 

Super GT Series (3rd-5th May): Bruno Spengler competes at Fuji.

 

BMW M works driver Bruno Spengler (CAN) supported Team Studie on the first endurance race of the season within the Japanese Super GT Series at Fuji (JPN). In the #7 BMW M4 GT3, he alternated with Niklas Krütten (GER) and Seiji Ara (JPN) through the three race hours. The trio began from ninth place and crossed the end line in eleventh place after 107 laps.

 

—

 

British GT Championship (26th-28th April): Challenging weekend at Silverstone.

 

At the second season occasion of the British GT Championship at Silverstone (GBR), BMW M works driver Raffaele Marciello (SUI) alongside John Ferguson (GBR) achieved a top-ten end. At the normal monitor within the south of England, the Team RAM Racing duo within the #15 BMW M4 GT3 completed ninth. BMW M works driver Dries Vanthoor (BEL) completed thirteenth alongside Darren Leung (GBR) within the #1 BMW M4 GT3.

Their teammates from Team Century Motorsport, Lewis Plato (GBR) and Carl Cavers (GBR) within the #22 BMW M4 GT3, adopted in 14th place. BMW M works driver Dan Harper (GBR) completed the race within the #14 BMW M4 GT3 alongside Michael Johnston (GBR) in seventeenth place. In the GT4 class, Ian Gough (GBR) and Tom Wrigley (GBR) steered the #29 BMW M4 GT4 to tenth place.

 

—

 

ESET Cup Series (26th-28th April): Class victories at Lake Balaton.

 

At the ESET Cup Series race weekend on the brand new Balaton Park Circuit (HUN), BMW M Motorsport drivers celebrated three class victories. In the D4 GT4 class, Antal Zsigo (SVK) in his Trevor Racing #500 BMW M4 GT4 triumphed in each the primary and second races forward of Rudolf Beno (SVK) within the #444 BMW M4 GT4 from Team Aries Racing. In the Endurance Race, Beno alongside Richard Gonda within the #444 BMW M4 GT4 gained the D4 GT4 class forward of Zsigo. Team Trevor Racing’s Stefan Rosina (SVK) celebrated second place within the total classification close to Lake Balaton in his #24 BMW M6 GT3.

 

—

 

British Touring Car Championship (26th-28th April): Podium celebrations at Donington Park.

 

Three races, three podiums. BMW groups skilled a profitable begin to the British Touring Car Championship at Donington Park (GBR). In the primary two races, Jake Hill (GBR) within the #24 BMW 330e M Sport completed third twice. When the 30-year-old needed to accept fifth place within the third run, one other BMW consultant stepped up when sfter fourth and fifth locations within the first two races, Colin Turkington (GBR) climbed onto the rostrum as second within the closing race. His Team BMW team-mate Adam Morgan (GBR) completed seventh within the second and third races. Hill and Turkington left the primary cease of the BTCC season in third and fourth locations within the total standings, with BMW main the producers’ standings.

BMW

“Good boy, SpOTTO”: Robot canine scans and screens manufacturing tools at BMW Group Plant Hams Hall

Leave a comment

Hams Hall, UK. A four-legged robotic named “SpOTTO” lately joined the group at BMW Group Plant Hams Hall within the UK. The autonomous robotic canine scans the plant, helps upkeep and ensures manufacturing processes run easily. Equipped with visible, thermal and acoustic sensors, SpOTTO is deployed in various distinctive use circumstances: On the one hand, it collects priceless information for the plant’s digital twin; on the opposite, it serves as a watchdog, overseeing upkeep of manufacturing amenities. “Virtualization, automation and artificial intelligence are central pillars of the BMW iFACTORY,” explains Klaus von Moltke, SVP of Engine Production at BMW AG. “Bold, innovative application examples like those at Plant Hams Hall showcase the full range of possibilities.”

Fully linked digital twin: Big information on three ranges

SpOTTO performs a pivotal function in creating and refining the plant’s totally linked digital twin. The digital twin operates on three ranges: On the primary stage, 3D representations of your entire plant are generated. The second stage contains a big information layer into which the autonomous robotic canine, manufacturing amenities and IT methods on the plant feed all related info. On the third stage – the appliance stage – devoted programmes kind the info collected into understandable and traceable items. It is the mixture of those three ranges that makes the totally linked digital twin distinctive. Using apps, consultants at Plant Hams Hall can now consider and utilise this information. Application examples embrace high quality assurance and manufacturing planning. Dirk Dreher, Director of BMW Group Plant Hams Hall, is delighted: “Thanks to the digital twin, we have an enormous quantity of precise data and evaluations, as well as a real-time picture of production processes. The project team at Plant Hams Hall has created unique use cases for our four-legged friend and integrated him perfectly into our processes.”

A dependable upkeep watchdog

Thanks to its visible, thermal and acoustic sensors, SpOTTO is ready to carry out quite a few upkeep duties. For occasion, he screens the temperature of producing tools and instantly recognises if an set up is operating too sizzling – an early signal of potential failure. At BMW Group Plant Hams Hall, SpOTTO additionally specialises in figuring out leaks within the compressed-air traces utilized in manufacturing. Given that compressed air requires a considerable quantity of vitality, detecting leaks rapidly can decrease vitality consumption.

SpOTTO was created by Boston Dynamics with the product title “Spot.” It is a nimble robotic sufficiently small to make use of indoors, that climbs stairs and traverses tough terrain with ease. “Spot” was renamed SpOTTO at Plant Hams Hall – paying tribute to the heritage of the British engine plant. Gustav Otto was one of many founders of BMW and son of Nicolaus Otto, inventor of the four-stroke inside combustion engine. In 2023, greater than 400,000 engines had been produced at Plant Hams Hall, which, alongside SpOTTO, additionally employs about 1,600 individuals. Before SpOTTO’s introduction on the plant, a devoted group examined which actions the robotic canine could be appropriate for in a one-year improvement course of. Other potential makes use of are presently being trialled within the plant’s Technical Basement: These embrace studying analogue working controls or performing complicated sequences of actions that make the four-legged robotic even higher at accessing hard-to-reach areas of manufacturing. In addition to Hams Hall, different BMW Group vegetation are additionally presently testing using robotic canines.

Working with trusted companions

Marco da Silva, Head of Spot Product Development at Boston Dynamics explains: “The working environment at Plant Hams Hall is well suited for industrial inspections using a quadruped robot like SpOTTO. The robot can easily take over the completion of numerous, repeatable monitoring tasks so the plant’s maintenance team can focus on maintenance. We are proud of the way the robot has been integrated into the plant.” 

BMW

Exclusive sportiness for each event: BMW M Performance Parts for the brand new BMW 5 Series Touring and the brand new BMW i5 Touring.

Leave a comment

Munich. Hallmark BMW driving pleasure, a sporty look and fashionable performance have at all times helped the BMW 5 Series Touring to occupy a particular place within the premium phase of the higher mid-range automobile phase. The totally electrical drive of the BMW i5 Touring within the sixth mannequin era makes this mixture much more engaging. BMW M Performance Parts will even be obtainable for all mannequin variants from market launch in May 2024, underlining the dynamic character of the brand new BMW 5 Series Touring and the brand new BMW i5 Touring in on a regular basis use and on journeys.

The model-specific aerodynamic, inside and suspension retrofit merchandise provide best alternatives to individually optimise the dynamic potential and athletic look of the brand new BMW 5 Series Touring and the brand new BMW i5 Touring. Products from the Original BMW Accessories programme are already homologated with the entire automobile, so no separate registration with the registration authorities is required.

Individual look, optimised aerodynamics and clever light-weight design with high-quality M Performance exterior components.

The BMW M Performance Parts for the outside set particular person accents in look and on the similar time fulfil useful necessities when it comes to light-weight development and aerodynamics. They have been specifically developed for the brand new BMW 5 Series Touring and the brand new BMW i5 Touring with M Sport Package or M Sport Package Pro and are completely matched to the geometry and design of the automobile. All Carbon parts are manufactured from carbon fibre bolstered plastic (CFRP), sealed with clear lacquer to attain a high-quality end, and provides the automotive a pointy and sporty look from all angles.

The three-part M Performance Carbon entrance splitter makes a assured assertion of unique sportiness and enhances the dynamic driving potential of the brand new BMW 5 Series Touring and the brand new BMW i5 Touring. Handcrafted to perfection, it gives performance-oriented downforce in addition to a placing look. For an much more unique look, the M Performance entrance splitter can be obtainable in high-gloss black on the left and proper.

In addition to the M Performance Carbon facet sill attachments, which give the automobile’s profile much more visible size and depth, the brand new M Performance accent stripes in Frozen Black emphasise the dynamically flowing strains of the brand new BMW 5 Series Touring and the brand new BMW i5 Touring. The digitally printed accent stripes are in matt anthracite and have the M Performance lettering. The M Performance facet sill decals, which include a placing curved line in matt gray, spotlight the automobile’s profile even additional. The decals are positioned beneath the doorways and supply a sublime color accent, particularly on the black facet sills. The unique M Performance Frozen Black accent stripes emphasise the sporty magnificence and intensify the shoulder space alongside the complete size of the automobile. The high-quality movie set is highway wash resistant and optimised for the automobile geometry of the BMW 5 Series Touring and the BMW i5 Touring.

The placing M Carbon exterior mirror caps and the M Performance Aramid aerial cowl present additional accents for the person and sporty profile of the brand new BMW 5 Series Touring and the brand new BMW i5 Touring. Aramid-reinforced plastic is similar to CFRP, however has a excessive electromagnetic permeability.

The three-piece M Performance rear diffuser can be constructed from aramid. It emphasises the powerfully designed rear of the automobile much more impressively and in addition allows the baggage compartment lid to be opened and closed with out touching it. The M Performance high-gloss black roof spoiler and M Performance Carbon rear fins add a contact of sportiness and magnificence.

High-quality inside choices carry racing aptitude to the cockpit.

The M Performance Carbon door sill trims are an unmistakable signal of the dynamic orientation of the brand new BMW 5 Series Touring and the brand new BMW i5 Touring. With their M Performance lettering, they’re an eye catching function when the doorways are open. For a very elegant first impression, M aluminium door sill trims are additionally obtainable. The M Performance door projector slides complement the present BMW LED door projector with three interchangeable M Performance graphics and supply a very attribute entry and exit expertise even at nightfall.

The M Performance flooring mats with leather-look edging, contrasting stitching and a seam in BMW M colors add a sporty contact to the inside. The purist design and exact workmanship of the M Performance stainless-steel pedal pads with uneven rubber profiles give the motive force’s footwell an unmistakably dynamic, high-tech look.

The M Performance key case additionally makes a transparent efficiency assertion on any event. Made from Alcantara and top quality leather-based in a carbon fibre look, the perfectly-fitting protecting cowl protects the automobile key from scratches and is an ideal addition to the vary of BMW M Performance Parts. The M Performance Carbon gasoline filler cap can be obtainable for the combustion engine and plug-in hybrid variants of the brand new BMW 5 Series Touring. It is especially straightforward to suit and options M Performance lettering on brushed aluminium.

Light alloy wheels and sport brake system for optimised efficiency.

The M Performance gentle alloy wheels obtainable for the brand new BMW 5 Series Touring and the all-electric BMW i5 Touring are ideally suited to a sporty driving fashion and make for a extremely distinctive look. Both summer season wheel with tyre units and winter wheel with tyre units within the dimensions 19, 20 and 21 inches can be found.

The summer season wheel with tyre set with 21-inch M Performance Cross Spoke gentle alloy wheels is accessible for all drive varieties in both M Bicolor Jet Black gloss end or M Frozen Midnight Grey. For all mannequin variants the 19-inch M Performance gentle alloy wheels in Y-Spoke design in Matt Black are additionally obtainable as a summer season wheel with tyre set. The corresponding winter wheel with tyre set, which can be appropriate for snow chains aside from the biggest rim width, are additionally obtainable with an additional tender tyre compound or studded tyres.

Also obtainable for the chilly season: 20-inch M aerodynamic wheel with tyre set in burnished Bicolour Midnight Grey end. They give all variants of the brand new BMW 5 Series Touring and the brand new BMW i5 Touring a very unique contact, even in winter. Additional wheel units are ideally stowed within the M Performance tyre luggage. A bolstered deal with makes it straightforward to move the wheels and protects each the motive force and the automobile from filth.

The M Performance 20-inch brake system ensures a deceleration efficiency worthy of the identify and brief braking distances. Its red-painted brake calipers that includes the four-colour M brand look significantly distinctive along with the open rim design of the 21-inch gentle alloy wheels. The sport brake system is fitted with six-piston aluminium mounted calipers on the entrance and single-piston floating calipers on the rear to supply deceleration. The large-format, internally ventilated and perforated M Performance light-weight brake discs present improved thermal load-bearing capability and thus ship even greater breaking energy beneath excessive situations.

BMW i5 M60 xDrive Touring*: Power consumption mixed in WLTP cycle: 20.8 – 18.3 kWh/100 km, Electric vary in WLTP cycle: 445 – 506 km

*preliminary knowledge

BMW

GT World Challenge Europe: BMW M Team WRT kicks off 2024 Sprint Cup season with a victory.

Leave a comment

Brands Hatch. BMW M Team WRT has began the 2024 season of the Fanatec GT World Challenge Europe powered by AWS Sprint Cup with a victory. Dries Vanthoor and Charles Weerts (each BEL) gained the primary of two races held on Sunday at Brands Hatch (GBR) within the #32 BMW M4 GT3. Their teammates, Valentino Rossi (ITA) and Maxime Martin (BEL), who’re collaborating in particular person begins within the Sprint Cup with the #46 BMW M4 GT3, have been unrewarded for his or her robust performances.

Starting from third place, Vanthoor introduced the #32 automobile as much as second earlier than the motive force change. With an ideal and swift pit cease, BMW M Team WRT ensured that Weerts returned to the monitor because the chief. After an hour of racing, the group celebrated a well-deserved victory for Vanthoor and Weerts. Rossi/Martin completed fifth however dropped to fifteenth as a consequence of a time penalty.

In the second race, Martin and Rossi managed to climb as much as a brief sixth from eleventh on the grid. However, a couple of minutes earlier than the top, whereas mendacity in P8, Rossi reported steering points and needed to head into the pits. Weerts and Vanthoor, beginning tenth, crossed the end line in seventh.

In the Silver Cup, Team WRT’s #30 BMW M4 GT3 was profitable: Sam De Haan (GBR) and Calan Williams (AUS) completed the 2 races in second and third positions within the class, respectively, securing podiums of their class.

Reactions after the races at Brands Hatch:

Vincent Vosse (Team Principal BMW M Team WRT): “It’s a great way to start the Sprint Cup season with a win here at Brands Hatch. Dries did a great job to take P2 after a few laps and then the pit crew did an excellent job, they were one and a half seconds quicker than anybody else, which brought us to P1 and Charles finished the job in the best way. It was a pity for the number 46 car of Valentino and Maxime. They were in P5 at the end of race one, but got a penalty for speeding in the pit lane. In race two, unfortunately an issue stopped them after they had put in a strong chase through the field. But they also did a great job.”

 

Dries Vanthoor, #32 BMW M4 GT3: “The first lap of race one was very interesting. I gained a position and then lost it again. So I tried to hunt down the Ferrari in front of me. It was difficult, I just tried to make no mistakes and to drive as fast as I could. It was crucial to stay as close to P1 as possible. Then the boys did an amazing pit stop and Charles did a great job to keep P1 and the win. Race two was a bit more difficult as we started from tenth. Finishing seventh was the best we could do. Now I’m looking forward to the next race.”

 

Charles Weerts, #32 BMW M4 GT3: “Dries did a great job qualifying us in third for race one. Then he had a very good start to the race. When we came to the pit stop, the guys in the pits did an amazing job – as we are used to from them. So we were able to take the lead in the pit, which was crucial in a way as it would have been very, very difficult to do so on track. So they played a very big part in this victory. It has been a great start to the season and that win will give us momentum for the next rounds.”

Maxime Martin, #46 BMW M4 GT3: “It’s not been the weekend we were expecting, but it’s always nice to come here and race on an old school track. It was still a very positive weekend for the team, as they had a victory with the sister car. We had some good fights and good fun. Let’s see what Misano brings!”

Valentino Rossi, #46 BMW M4 GT3: “I got my first podium with the BMW M4 GT3 here at Brands Hatch, but this time it was more difficult! Yesterday we suffered a lot but today it was better. Unfortunately, I had a problem with the steering in the second race, where I had to retire and we also had a penalty for speeding in the pit lane in race one. Anyway we suffered more than we expected, but it was still a pleasure to race at Brands Hatch! Let’s see what we can do in Misano!”

BMW

Construction of high-voltage battery meeting will get underway at BMW Group Plant San Luis Potosí

Leave a comment

San Luis Potosí. BMW Group Plant San Luis Potosí is gearing up for manufacturing of the Neue Klasse: Construction of a neighborhood high-voltage battery meeting has now begun, together with growth tasks for the physique store, meeting and logistics areas. A complete of 800 million euros will likely be invested in increasing the Mexican manufacturing web site.

The Neue Klasse may even be produced in Mexico from 2027 onwards. The Sports Activity Vehicle mannequin will likely be launched on the new BMW Group Plant Debrecen in Hungary because the preliminary spinoff of the Neue Klasse in late 2025, whereas the Sedan will ramp up in Munich in 2026. Just one 12 months later, further manufacturing capability will likely be obtainable in Mexico – initially, for the Sports Activity Vehicle. The future high-voltage battery meeting at Plant San Luis Potosí, masking an space of greater than 80,000 sq. metres, is essential to integrating the Neue Klasse on the manufacturing web site.

“The battery assembly in San Luis Potosí will be part of our global production network. For our new sixth-generation e-drive alone, we are building five locations on three continents,” defined Milan Nedeljković, member of the Board of Management of BMW AG chargeable for Production, firstly of development in Mexico. The BMW Group is dedicated to the “local for local” precept worldwide. “Locating battery factories close to vehicle manufacturing makes production more resilient.”

Close hyperlinks between battery manufacturing unit and automobile manufacturing

In line with its “local for local” precept, the BMW Group locates its high-voltage battery meeting amenities worldwide as shut as potential to its automobile crops. In addition to the placement in San Luis Potosí, meeting websites for sixth-generation high-voltage batteries are additionally being in-built Debrecen (Hungary), Shenyang (China), Woodruff, close to Spartanburg (USA) and Irlbach-Straßkirchen (Lower Bavaria). This strategy safeguards manufacturing, even within the occasion of unexpected political and financial developments. Existing areas are additionally being strengthened, securing jobs. The quick distances concerned cut back the carbon footprint of car manufacturing.

The BMW Group will use its newly developed spherical cells for the primary time within the Neue Klasse. This leap in know-how will enhance the vitality density of cells by 20 p.c and enhance charging pace by as much as 30 p.c. Range will likely be prolonged by 30 p.c. 

Further growth of Plant San Luis Potosí

As properly as integrating battery meeting, different adjustments are being made at Plant San Luis Potosí: Just below 20,000 sq. metres will likely be added to the physique store, leading to a complete space of over 90,000 sq. metres. Assembly and logistics areas are additionally being expanded by nearly 10,000 sq. metres.

“With this further development of our site, we are also gearing up in Mexico for the launch of the next BMW model generation. As the first premium OEM producing fully-electric vehicles and high-voltage batteries in Mexico, we are at the forefront of our industry and, at the same time, continuing to reduce our environmental footprint,” mentioned Harald Gottsche, president and CEO of BMW Group Plant San Luis Potosí.

Photovoltaic output to double

When it involves environment friendly vitality provides, the BMW Group makes use of site-specific options at its areas around the globe. “In Mexico, we are planning to expand the photovoltaic systems within the plant, to double the output from the solar panels,” mentioned Nicole Haft-Zboril, Head of Real Estate Management on the BMW Group. “The plan is to generate more than 20 percent of the electricity we need at the moment – directly on the factory premises.” The wastewater therapy plant has additionally been expanded, with an funding of three.3 million euros considerably rising the reuse of handled wastewater.

Extensive abilities growth programme

BMW Group Plant San Luis Potosí can also be stepping up its dedication to abilities growth, aimed toward guaranteeing staff are extremely certified and ready for the challenges of the long run. Training will embrace matters equivalent to security consciousness round manufacturing of high-voltage programs and the usage of robotics in manufacturing processes.

The BMW Group plant in San Luis Potosí began manufacturing in 2019. Around 3,700 staff presently produce the BMW 3 Series Sedan in addition to the BMW 2 Series Coupé and the BMW M2 fashions for the worldwide market.

BMW

BMW Motorrad presents the Automated Shift Assistant (ASA).

Leave a comment

Munich. With the brand new Automated Shift Assistant (ASA), BMW Motorrad presents an progressive technical answer that makes driving less complicated and extra snug. True to the motto “Simplify your ride”, the driving expertise is additional enhanced by the automation of the clutch and gearshifting, with out sacrificing the emotionally essential dynamics of shifting.

The Automated Shift Assistant incorporates a intelligent practical design through which two electromechanical actuators automate the clutch and gearshift of the six-speed transmission, which is the principle distinction to a standard shift assistant. There is not any want for a hand lever to function the clutch manually. Starting, stopping and manoeuvring are made simple with the Automated Shift Assistant.

Riding with the Automated Shift Assistant additionally turns into extra fulfilling due to quick, rev- and load-adapted shift sequences and the ensuing exact gear adjustments. The rider’s workload is decreased, which makes driving much more fulfilling. In addition, the Automated Shift Assistant creates an much more direct reference to the highly effective boxer engine, because the exact clutch actuation makes it even simpler to regulate the driving expertise through the throttle grip and gearshift lever.

In ‘M’ shift mode, gear adjustments can nonetheless be made by foot management, permitting the rider to resolve when to vary gears.

In ‘D’ shift mode, the Automatic Shift Assistant actually comes into its personal. Shift factors are mechanically chosen by the engine management unit. In each “M” and “D” modes, the rider advantages from completely executed gear adjustments with a clean interruption of traction. The result’s environment friendly bike acceleration and elevated driving stability. 

When shifting up, for instance, the jolt related to a traditional handbook transmission with a handbook clutch is essentially eradicated, as is the danger of helmet contact between rider and passenger.

Downshifts are additionally designed to be as clean as potential, minimising chassis disturbances. Specific traits of the automated shift operate are assigned to the completely different driving modes to make sure good shift behaviour in every driving scenario. In mixture with Active Cruise Control or entrance collision warning, the networking of capabilities additionally brings the way forward for motorcycling to life.

Automated clutch and kit shifting for a brand new driving expertise.
In tough driving conditions, utilizing the clutch and throttle takes numerous focus. If you’re travelling with baggage and maybe a passenger, utilizing the clutch and gearshift takes up assets. The rider stays in management and has extra freedom in each driving scenario with the Automated Shift Assistant. Riding turns into a extra relaxed and fulfilling expertise.

The highly effective boxer engine permits nearly easy pulling away on uphill gradients, for instance, due to automated clutch operation, which additionally pays dividends by way of higher automobile management off-road or on tough surfaces.

Riding pleasure takes on an entire new that means while you select the automated D mode. Optimally chosen gear adjustments create a brand new driving sensation with a extra intense driving expertise. The proper gear is mechanically chosen based on the rider’s particular person driving wants, leading to a harmonious and very clean driving expertise.

Electromechanical clutch and gearshift actuators mixed with subtle digital controls.
The Automated Shift Assistant is the logical and technical evolution of the BMW Motorrad Shift Assistant Pro. Two electronically managed electromechanical actuators function the clutch and gearshift, enabling simple beginning and automatic gear adjustments.The rider’s shift request is transmitted to the management unit through a gearshift lever sensor, which is actuated by the traditional foot-operated gearshift lever. Additional sensors decide the revs of the transmission enter shaft and the clutch place. These values are transmitted to the TCU (Transmission Control Unit), which is carefully linked to the engine management unit, for modelling and management of the clutch, shift actuation and standing.

The clutch is operated by an electro-mechanical actuator mixed with a hydraulic system with a direct hydraulic connection between the clutch grasp and slave cylinders. The actuator regulates the required clutch slip, engages the clutch when altering gear and disengages it when stopping.

In handbook shift mode “M”, the rider can transfer the gearshift lever within the desired path within the typical method. If the revs within the desired goal gear are inside the most or minimal rev vary, the shift is made straight. If the engine revs fall under a gear-dependent minimal pace, downshifts are additionally carried out mechanically in handbook mode. This prevents the engine from stalling.

In shift mode “D” the gears are modified mechanically relying on the driving mode, engine revs, throttle place and lean angle parameters. Gears are shifted based on the driving scenario and dynamic necessities.

The advantages of the Automatic Shift Assistant (ASA) might be summarised as follows
· Completely eliminates the necessity for the rider to function the clutch.
· Dynamic and comfy gear adjustments for extra driving pleasure.
· Choice of handbook or automated gear shifting.
· Automatically adapts gear shifts to the rider’s dynamic preferences in automated D mode.
· Eliminates the potential of engine stalling because of unfavourable gear shifts.

You will discover press materials on BMW bikes within the BMW Group PressClub at www.press.bmwgroup.com.

BMW

DTM Opener in Oschersleben: Schubert Motorsport experiences rollercoaster of feelings at house spherical.

Leave a comment

Oschersleben. Schubert Motorsport kicked off the 2024 DTM season with their house spherical at Oschersleben (GER) and skilled a rollercoaster of feelings simply outdoors their headquarters. Sheldon van der Linde (RSA) completed the 2 eventful races on Saturday and Sunday in fourth and sixth positions, respectively. René Rast (GER) additionally scored factors with two seventh-place finishes in each races. Marco Wittmann (GER) led the Saturday race within the closing phases, however retired simply earlier than the end resulting from gas strain points. On Sunday, Wittmann secured factors with a tenth-place end.

The first race on Saturday already offered followers at Oschersleben with loads of pleasure. With a tactical masterpiece, Schubert Motorsport introduced Wittmann within the #11 Schaeffler BMW M4 GT3, ranging from nineteenth, into the lead. However, simply earlier than the tip, with victory in sight, Wittmann rolled to a cease on the start-finish straight resulting from gas strain points. Van der Linde fought within the #31 Shell BMW M4 GT3 till the end line for a podium end, in the end ending fourth with a slim hole. Rast secured factors in seventh place within the #33 RoboMarkets BMW M4 GT3.

After a difficult qualifying session on Sunday, all three BMW M works drivers staged a comeback within the second race, shifting up from the again of the sector. However, van der Linde suffered an early setback when he couldn’t keep away from a collision forward of him initially. The South African resumed the race in final place and labored his manner up place by place. Eventually, he completed sixth, adopted straight by Rast, who once more was seventh. Wittmann accomplished the factors positions in tenth place.

In the assist programme, the ADAC GT Masters and the ADAC GT4 Germany additionally kicked off the 2024 season – with successes for the BMW M4 GT3 and the BMW M4 GT4. In the ADAC GT Masters, Maxime Oosten (NED) secured pole place for FK Performance Motorsport in Saturday’s qualifying. In the primary race, he celebrated victory along with teammate Leon Köhler (GER) within the #54 BMW M4 GT3. In the ADAC GT4 Germany, Gabriele Piana (ITA) and Michael Schrey (GER) within the Hofor Racing by Bonk Motorsport #2 BMW M4 GT4 secured pole place and victory in race one on Saturday. Their teammates, Leon Wassertheurer and Tim Reiter (each GER), secured third place on the rostrum within the #3 BMW M4 GT4. In Sunday’s qualifying, Reiter claimed pole place. Piana and Schrey celebrated their second win of the weekend in Sunday’s race.

Comments after the DTM season opener:

Björn Lellmann (Head of Customer Racing at BMW M Motorsport): “Unfortunately, it was a rather mixed start for us in the DTM. On Saturday, thanks to a superb strategy, Marco Wittmann could have achieved a clear victory, but he unfortunately lost it due to a team error. However, Sheldon van der Linde fought for the podium until the end, and René Rast also scored points by finishing seventh in both races. Sunday’s qualifying didn’t go well, but all three fought back, and with P6, P7, and P10 in the end, we’re really satisfied. Congratulations to the successful BMW M Motorsport teams in the ADAC GT Masters and ADAC GT4 Germany. With pole positions, wins, and the podium, they really impressed.”

Torsten Schubert (Team Principal Schubert Motorsport): “After qualifying, I said: If we have all three cars in the top ten I’m satisfied. We achieved that on Sunday. I’m pleased that we could take these points. It’s not only important to win races, but also to collect points. We knew this weekend that the track wasn’t quite optimal for us. Nevertheless, we were able to show consistent race performances with all three cars. The retirement of Marco on Saturday due to fuel issues was frustrating. Now we have to continue collecting points throughout the season, starting with the Lausitzring.”

Sheldon van der Linde (#31 Shell BMW M4 GT3): “I think it was a really good weekend. The car didn’t really suit this track and, considering that, we had very good results with fourth and sixth. It was definitely unexpected considering where we ended up last year with basically almost not getting into the points. I am very proud of the guys, the strategy was clearly the key point in the race. At the end of race two, we jumped like five or six cars. I am generally very happy with the points this weekend.”

René Rast (#33 RoboMarkets BMW M4 GT3): “It was a challenging weekend, especially on Sunday. For some reason, we didn’t have the pace in qualifying. Still, it was seventh place in the race, just like on Saturday. We scored points twice, but, of course, that’s not what we envision. We want to fight for podiums. But we knew that Oschersleben would be a tough track for us. So we made the best out of it.”

Marco Wittmann (#11 Schaeffler BMW M4 GT3): “It was, of course, frustrating that due to an error on Saturday, which is human, we threw away the victory and 25 points after we had taken the lead through the right call, strategy, and a bit of luck. On Sunday, nothing went right. We didn’t have the pace; the balance was very difficult. So, it was just about finishing the race, but there wasn’t really anything to gain. It was a tough weekend.”