Over time, gunk and different objects could cause a blockage within the detergent drawer. If you checked the mesh filter and verified the hoses are straight, there could also be some buildup inflicting the 4C error and stopping water from operating by means of your machine.

Like the mesh filter, you must clear your dispenser drawer often to forestall points from growing over time. To clear the drawer:

1. Open the detergent drawer
2. Find the discharge lever contained in the drawer (close to the softener compartment)
3. Press the lever and pull the drawer out concurrently
4. Remove the detergent information (within the left-most compartment)
5. Remove the softener housing (within the middle compartment)
6. Rinse all elements, utilizing a toothbrush or comfortable bristle brush to take away residue
7. Using a toothbrush, clear the detergent drawer housing within the washer
8. Replace all elements and reinstall the drawer
9. Run a rinse cycle to take away the remaining detergent

If you are utilizing automated dispensers for detergent, take away and rinse them individually. Open the lid, fill with water, and shake vigorously to loosen the buildup. Repeat steps eight and 9 above to confirm that the cleansing fastened the error code.